| Other Civil Engineering Interview Questions |
|| Asked @
|What height of a 3.5 m high 300 x300 mm proposed col. can
be casted at a time ?
|Machine mix is better than hand mixing to get––
|fluid flow takes place due to its:-
|all engineering filed in which branch mother branch
|Describe the term BILL OF QUANTITY (BOQ)?
|1) what is the use of pin and plate vibrators during slab
casting? 2) how much cement bags are required for 1sqm
4inch brick wall? 3) Is it viable to provide overlap at
column , beam & slab junction. if no why? 4) if bar dia is
changing in column reinforcement , which dia bars overlap
is considered? 5) what is isolated and ecentric footing?
|deshuttering time for RCC for DPC over the foundation.
|1cracks found in brick wall in service building, how to
rectify it,with low cost ?
how to find propagation of cracks (in depthwise) and arrest
on that stage?
Is it require to design for Expansion joint in Brick work?
if so what is the required distaces?
|Insted of water is there any liquid to mix in concrete / in
|where cross hairs in surveying telescope are fitted
|How to evaluate the elastic modulus of soil from the plate
load test result? for example ..one of test results are
Max. settement =4.56mm(at 900kPa)
Residual settlement = 4.02mm
Maximum pressure on soil 900kpa
Soil bearing capacity 300kpa
Soil description =Grey, clayey silty SAND with gravels and
|The resultant upthrust on a body partially immersed in a
liquid acts through?
|For more Civil Engineering Interview Questions Click Here |