| Other CCDA Interview Questions |
| |
| Question | Asked @ | Answers |
| |
| 5. Which Two Settings must be configured in order to use the
GUI to configure Call Admission Control with voice Applications
| Pari-Networks | 1 |
| Match the following routing protocols with their routing
algorithm.
A. OSPF 1. Distance Vector
B. IGRP 2. Link-State
C. RIP
D. IS-IS
E. NLSP
F. RTMP
G. AURP
H. BGP | | 1 |
| What set of Frame Relay enhancements offer extensions for
managing complex internetworks?
A. CMT
B. SNMP
C. LMI
D. RMON | | 1 |
| When characterizing a network, how many buffer misses should
not be exceeded on a Cisco router per hour?
A. 10
B. 25
C. 50
D. 100 | | 1 |
| What are metrics used with IGRP?
A. Ticks
B. Load
C. Hops
D. Delay | | 1 |
| What is the second step when creating a prototype?
A. Develop a test plan
B. Review the customer requirements
C. Investigate what the competition will be proposing
D. Define how big the prototype will be | | 1 |
| Which IP address is not a private address?
A. 142.18.0.0
B. 10.0.0.0
C. 172.16.0.0
D. 192.168.0.0 | NetMax | 1 |
| Regarding a full-mesh network and a partial-mesh network,
what is the most accurate statement?
A. Split Horizon will not work on a full-mesh network
B. A full-mesh network is more expensive because more
routers are used
C. A partial-mesh network is less expensive because less
virtual circuits are used
D. Broadcasts are more plentiful on a partial-mesh network | | 1 |
| Which address is updated at each hop in the path in path
switching? | | 1 |
| Which tools help to characterize a network?
A. Sniffer
B. CiscoWorks 2000
C. Netsys
D. All of the above | | 1 |
| What are the five areas of the ISO Network Management Model?
A. Performance management
B. Accounting management
C. Flow management
D. Configuration management
E. Operating management
F. Fault management
G. Routing management
H. Security management | | 2 |
| What address is 12 hexadecimal, resides in the Data-Link
layer, and is burned in the ROM by the manufacturer. | | 1 |
| 6. Which of these statements best describes VPLS ?
| Pari-Networks | 1 |
| What is the standard ethernet cabling specification? (not
IEEE 802.3)
A. STP
B. Coax (thin)
C. Coax (thick)
D. UTP | | 1 |
| You may receive a case study including Token Ring and
Ethernet, so you may want to look at any constraints with
cabling between Token Ring and Ethernet networks.
Which statement describes the constraints imposed by the
existing network?
A. Replace all cabling
B. Test all cabling
C. Do not replace cabling
D. Use microwave instead of cabling | | 1 |
| SNMP agents are:
A. Management devices
B. NMS (Network Management Stations)
C. network devices such as routers, switches, or hubs
D. PDUs | | 1 |
| What device initiates a session in an X.25 network?
A. DTE
B. DCE
C. PSE
D. PAD | | 1 |
| The following are examples of proactive network management
except:
A. Allocate sufficient staff time
B. Troubleshooting and solving system problems
C. Generate reports
D. Identify Problems | | 1 |
| OSPF supports priority routing for which TCP/IP feature?
A. PA
B. TCP
C. IP
D. SNA | | 1 |
| Which condition does not create LAN media problems?
A. Protocol doesn?t scale well
B. Long wait for the token
C. Excessive collisions
D. Too many devices | | 1 |
| |
| For more CCDA Interview Questions Click Here |
Ask Questions on ANYTHING, that arise in your Daily Life at 
Site Map
