| Other Electrical Engineering Interview Questions |
|| Asked @
I am a technical persons.In one of our Electrical Sub-
Station, We have installed three numbers of
1250KVA ,11KV/0.415KV Transformer to feed the Factory load.
We have found some abnormality. In one of our Transformers
the leakeage current from transformer body to earth through
earth continuity wire is almost 86 Amp but in other
transformer it is (5-10)Amp. where the load current on
three phase and neutral are respectively
1360Amp,1400Amp,1370 Amp & 176Amp. So please any technical
person help me about the reasons of this situation and how
I can rectify the fault. Moreover,I have measured the earth
resistance of the Earth continuity wire which is less than
|what is the right cable size for 100 hp mpter.
|we can use airconditioner for cooling the winding of transformer ,if not why?
|how ELCB drip when earth and phase touch together?
|what is resistor
|How to calculate the NGR value for a 2.7MVA Transfomer,
11KV system where the fault current has to be limited to
|how many number of terminals are available in CURRENT
|Transformer/insulating oil tester(BDV tester)
|what is the earth to neutral voltage(maximum and minimum)
according to ieee standards
|DOES AN EARTH FAULT CURRENT ON THE DELTA SIDE OF A 6.6/33KV
STEP UP STAR-DELTA CONNECTED TRANSFORMER REFLECT ON THE
STAR SIDE? IF YES, THEN HOW AND WHAT IS THE AMOUNT OF
|how to calculate neutral current in three phase four wire
|Explain difference between aluminium coductor & copper
|For more Electrical Engineering Interview Questions Click Here |