| Other CCDA Interview Questions |
| |
| Question | Asked @ | Answers |
| |
| EIGRP was developed to improve what two protocols?
A. OSPF
B. RIP
C. BGP
D. IGRP | | 2 |
| 5. Which Two Settings must be configured in order to use the
GUI to configure Call Admission Control with voice Applications
| Pari-Networks | 1 |
| What network design is becoming common when there is a
central office with one or more remote locations?
A. ISDN PRI at the central location and ISDN BRI at the
remote locations.
B. Using core routers at all sites
C. Only using access routers
D. Using a full mesh network | | 1 |
| When doing an RFP (Request for Purchase) for a customer, at
what step do you reiterate your solution and the customer
requirements?
A. Design Requirements
B. Design Solution
C. Summary
D. Appendices | | 1 |
| What address is 12 hexadecimal, resides in the Data-Link
layer, and is burned in the ROM by the manufacturer. | | 1 |
| Which tools help to characterize a network?
A. Sniffer
B. CiscoWorks 2000
C. Netsys
D. All of the above | | 1 |
| What would you include in your prototype design for this
particular case study? | | 1 |
| When are SNMP traps sent?
A. When the SNMP manager wants to perform remote
configuration on a networking device
B. When an SNMP agent wants to inform the SNMP manager about
a change of state on the networking device
C. When the SNMP manager wants to access large chunks of data
D. When the NMS wants to share trap information | | 2 |
| What set of Frame Relay enhancements offer extensions for
managing complex internetworks?
A. CMT
B. SNMP
C. LMI
D. RMON | | 1 |
| Which address is updated at each hop in the path in path
switching? | | 1 |
| Match the following routing techniques with the correct
descriptions:
A. Static Routing 1. Mandatory configuration
B. Dynamic Routing 2. No route updates
3. Can better tolerate failures
4. Sends update when topology changes
5. Path is determined by the router
7. Traffic is reduced | | 1 |
| When designing a flat switched network you can have:
A. the same number of IP and IPX nodes without performance
degradation
B. more IP than IPX nodes on the same segment
C. more IPX than IP nodes on the same segment
D. more AppleTalk than IP nodes on the same segment | | 1 |
| What are three ASN.1 (Abstract Syntax Notation One) data types?
A. data feeds
B. name
C. syntax
D. encoding | | 1 |
| Which two LAN switching features apply to store-and-forward
switches?
A. CRC
B. Frame length
C. Source address
D. Collision Windows | | 1 |
| How is data transmitted in a Token Ring network?
A. The node calls for a token, appends the data, modifies a
bit in the frame, then sends the token
B. The node waits for the token, gains possession of it,
appends the data, modifies a bit in the frame, then sends
the token
C. The node transmits the data whenever it wants to
D. The active monitor must first grant permission for the
node to transmit data. After it receives permission, it
sends the data | | 1 |
| Which router would you choose for your design?
A. 1600
B. 1700
C. 3600
D. 3640
E. 7200 | | 1 |
| What are three advantages of using fiber?
A. Security
B. Eliminate RFI and EMI
C. Low cost
D. High speed | | 1 |
| You want to assign IP addresses to a large number of
workstations. What is the best way to do this?
A. Cisco Network Registrar
B. Cisco IOS NAT Feature
C. Assign them static IP addresses
D. Let the workstation assign its own IP address | | 1 |
| ISDN is referenced by a suite of ITU-T (International
Telecommunication Union Telecommunication Standardization
Sector) standards encompassing what three layers of the OSI
reference model?
A. Physical
B. Data Link (LAPD)
C. Data Link (RMON)
D. Network (Q.930 and Q.931) | | 1 |
| What are two ways to connect a PC to a LAN when using ATM
(Asynchronous Transfer Mode)?
A. ATM endpoint
B. ATM LAPB
C. ATM router
D. ATM switch | | 1 |
| |
| For more CCDA Interview Questions Click Here |
Did you received any Funny E-Mails from your Friends and like to share with rest of our friends? Yeah!! you can post that stuff 
Site Map
