| Other CCNA Interview Questions |
| |
| Question |
Asked @ |
Answers |
| |
| What are the job opportunities i will get once i complete
my CCNA certification. |
| 2 |
| The following is partial output from a routing table ;
'192.168.10.0 [100/1300] via 10.1.0.1, 00:00:23, Ethernet1'
Which routing protocol is being used? (assuming defaults
have not been
changed)
A.) OSPF
B.) RIP
C.) BGP
D.) IGRP |
| 1 |
| What is the default encapsulation of Netware 3.12?
A.) Ethernet_II
B.) 802.5
C.) 802.2
D.) 802.3 |
| 1 |
| Identify the order of the 5 step encapsulation?
1. Create the segment
2. Convert the frame to bits
3. Create the packet
4. Create the frame
5. User creates the data
A.) 1,2,4,2,5
B.) 2,1,3,4,5
C.) 5,1,3,4,2
D.) 5,3,4,1,2 |
| 1 |
| Which protocol is used for booting diskless workstations?
A.) IP
B.) ARP
C.) RARP
D.) TCP
E.) SNMP |
| 2 |
| In static route, what is the difference between next hop ip
address and local interface address, except the
Administrative Distance. |
HCL | 5 |
| What does the command "IP name-server 255.255.255.255"
accomplish?
A. It sets the domain name lookup to be a local broadcast.
B. This is an illegal command.
C. It disables domain name lookup.
D. The command is now defunct and has been replaced by "IP
server-name ip any" |
Cisco | 1 |
| Identify the correct IGRP configuration?
A.) Router# router igrp 100
Router# network 10.0.0.0
B.) Router(config)#router igrp 100
Router(config-router)#network 10.0.0.0
C.) Router(config)# router igrp
Router(config-router)# network 10.0.0.0 |
| 3 |
| What is the diiffernce between windows xp & windows 2000?
|
VigaTech | 6 |
| Which two statements about a reliable connection oriented
data transfer are true? (Choose two)
A. recipients acknolwedge receipt of data
B. when tankers are filled to capacity, datagrams are
discarded and not retransmitted
C. windows are used to control the amount in outstanding
unacknowledged data segments
D. if the sender a timer expires before receipt of an
acknowledgement the sender drops the connection
E. The receiving device waits for acknowledgements from the
sending device before accepting more data segments |
| 1 |
|
Which network mask should you place on a Class C network to
accommodate a user requirement of ten subnetworks?
A. 255.255.255.192
B. 255.255.255.224
C. 255.255.255.240
D. 255.255.255.248 |
| 7 |
| Identify 3 characteristics of switches?
A.) Increase available bandwidth
B.) Decrease broadcast traffic
C.) Support full duplex in a multipoint topology
D.) Make fowarding decision using MAC address
E.) Create collision domains |
| 1 |
| |
| For more CCNA Interview Questions Click Here |
along with your userid / name. ThanQ
Site Map
