| Other CCDA Interview Questions |
| |
| Question | Asked @ | Answers |
| |
| 6. Which of these statements best describes VPLS ?
| Pari-Networks | 1 |
| You want to assign IP addresses to a large number of
workstations. What is the best way to do this?
A. Cisco Network Registrar
B. Cisco IOS NAT Feature
C. Assign them static IP addresses
D. Let the workstation assign its own IP address | | 1 |
| What would you include in your prototype design for this
particular case study? | | 1 |
| Which of the following three sets of IP addresses and subnet
masks are private IP addresses?
A. 10.0.0.0 255.0.0.0
B. 172.16.0.0 255.255.0.0
C. 172.16.0.0 255.240.0.0
D. 192.168.0.0 255.255.0.0 | | 1 |
| What PPP frame initiates the network layer protocols to be
used during a connection? | | 1 |
| What is the technique used by a router that can
automatically initiate and close a circuit-switched session?
A. PLP
B. LAPP
C. ASN.1
D. DDR | | 1 |
| Which IP address is not a private address?
A. 142.18.0.0
B. 10.0.0.0
C. 172.16.0.0
D. 192.168.0.0 | NetMax | 1 |
| What happens to performance if the maximum MTU (Maximum
Transmission Unit) size is used?
A. Performance increases
B. Performance decreases
C. Performance stays the same
D. Performance has nothing to do with the MTU | | 1 |
| A remote user needs a static IP address to support a
specific application.Which remote access VPN addressing
technique supports this ?
| Pari-Networks | 2 |
| What type of address is analyzed by a Layer 2 switch?
A. network address
B. MAC and network address
C. Protocol type, MAC, and network address
D. MAC address | | 2 |
| Client traffic is being bridged trough LAN interfaces on two
WLCs.Which roaming option will Keep
them on the same IP Subnet ?
| Pari-Networks | 2 |
| What network design is becoming common when there is a
central office with one or more remote locations?
A. ISDN PRI at the central location and ISDN BRI at the
remote locations.
B. Using core routers at all sites
C. Only using access routers
D. Using a full mesh network | | 1 |
| When doing an RFP (Request for Purchase) for a customer, at
what step do you reiterate your solution and the customer
requirements?
A. Design Requirements
B. Design Solution
C. Summary
D. Appendices | | 1 |
| What are metrics used with IGRP?
A. Ticks
B. Load
C. Hops
D. Delay | | 1 |
| What category or categories does Client/Server fit into the
following Job Aid?
Name of Protocol Type of Protocol # of Users # of Hosts or
Servers Comments | | 1 |
| When would you suggest static routes to your customers?
A. When scalability is important
B. When bandwidth is limited
C. When the network will be changing frequently
D. Always suggest static routes | | 1 |
| how many switches can be cascaded | | 1 |
| Which of the following is not true in regards to route
summarization?
A. It increases the size of the routing table
B. It increases the complexity of the network
C. IP networks must be contiguous to be safely summarized
D. Routing tables must have the capacity to support
classless routing | | 1 |
| What is not a function of the distribution layer?
A. Routing between VLANs
B. Implement tools such as access lists, packet filtering,
and queuing
C. Implement security and network policies
D. Provide workgroup/user access to the network | | 1 |
| In which category should Frame Relay be placed within the
following Job Aid?
Name of Protocol Type of Protocol # of Users # of Hosts or
Servers Comments | | 1 |
| |
| For more CCDA Interview Questions Click Here |
Site Map
