| Other CCDA Interview Questions |
| |
| Question | Asked @ | Answers |
| |
| Traffic Shaping does which one of the following?
A. Eliminates bottlenecks by throttling back traffic volume
at the source or outbound end
B. Reduces the frame size so bandwidth is better utilized
C. It increases source traffic to a configured bit rate
D. Allows you to control hubs and repeaters | | 1 |
| What are three LAPB features supported by SDLC?
A. Frame types
B. Frame format
C. Field functions
D. ABM | | 1 |
| How many networks will be advertised using route
summarization within an OSPF network if you are given the
following networks?
192.108.168.0
192.108.169.0
192.108.170.0
192.108.171.0
192.108.172.0
192.108.173.0
192.108.174.0
192.108.175.0
A. 1
B. 2
C. 3
D. 4
E. 5 | | 1 |
| OSPF supports priority routing for which TCP/IP feature?
A. PA
B. TCP
C. IP
D. SNA | | 1 |
| Which of the following three sets of IP addresses and subnet
masks are private IP addresses?
A. 10.0.0.0 255.0.0.0
B. 172.16.0.0 255.255.0.0
C. 172.16.0.0 255.240.0.0
D. 192.168.0.0 255.255.0.0 | | 1 |
| What are two services that the OSPF Hello protocol provides?
A. It discovers neighbor routers
B. It gets routes from neighbors during startup
C. It helps elect a designated router
D. It allows administrator to test for connectivity between
two devices | | 1 |
| What are two differences between 10BaseT and 100BaseT?
A. Speed
B. Frame format
C. Addressing
D. Network diameter | | 1 |
| What are two services that DUAL (Diffusing Update Algorithm)
performs for EIGRP?
A. Provides loop-free operation throughout an entire route?s
computation
B. Simultaneous synchronization of routers involved in a
topology change
C. Updates the autonomous system number
D. Allows advertised distances to use feasible distances | | 1 |
| What is the technique used by a router that can
automatically initiate and close a circuit-switched session?
A. PLP
B. LAPP
C. ASN.1
D. DDR | | 1 |
| When doing an RFP (Request for Purchase) for a customer, at
what step do you reiterate your solution and the customer
requirements?
A. Design Requirements
B. Design Solution
C. Summary
D. Appendices | | 1 |
| What is the standard ethernet cabling specification? (not
IEEE 802.3)
A. STP
B. Coax (thin)
C. Coax (thick)
D. UTP | | 1 |
| EIGRP was developed to improve what two protocols?
A. OSPF
B. RIP
C. BGP
D. IGRP | | 2 |
| Match the following services with the correct descriptions:
A. BRI 1. Provides two 64 Kbps B channels
B. PRI 2. Provides 23 or 30 B channels
3. Provides one 16 Kbps D channel
4. Provides one 64 Kbps D channel
5. Provides a total bit rate of 2.048 Mbps
in Europe and Australia
6. Provides a total bit rate of 144 Kbps
7. Provides a total bit rate of 1.544 Kbps
in North America and Japan | | 1 |
| Which IP address is not a private address?
A. 142.18.0.0
B. 10.0.0.0
C. 172.16.0.0
D. 192.168.0.0 | NetMax | 1 |
| ISDN is referenced by a suite of ITU-T (International
Telecommunication Union Telecommunication Standardization
Sector) standards encompassing what three layers of the OSI
reference model?
A. Physical
B. Data Link (LAPD)
C. Data Link (RMON)
D. Network (Q.930 and Q.931) | | 1 |
| Which address is updated at each hop in the path in path
switching? | | 1 |
| What type of address is analyzed by a Layer 2 switch?
A. network address
B. MAC and network address
C. Protocol type, MAC, and network address
D. MAC address | | 2 |
| What are three ASN.1 (Abstract Syntax Notation One) data types?
A. data feeds
B. name
C. syntax
D. encoding | | 1 |
| A device has 2 synchronous ports, 16 asynchronous ports, and
one ethernet port. What is this device most likely to be?
A. CSU/DSU
B. Access Server
C. Multiplexer
D. ISDN Terminal Adapter | | 1 |
| In an ATM network, which type of device is in a LAN per ELAN
(Emulated LAN)?
A. LAN Emulation Workstation
B. LAN Emulation Router
C. LAN Emulation Server
D. LAN Emulation Bridge | | 1 |
| |
| For more CCDA Interview Questions Click Here |
Site Map
