| Other CCDA Interview Questions |
| |
| Question | Asked @ | Answers |
| |
| how many switches can be cascaded | | 1 |
| SNMP agents are:
A. Management devices
B. NMS (Network Management Stations)
C. network devices such as routers, switches, or hubs
D. PDUs | | 1 |
| EIGRP was developed to improve what two protocols?
A. OSPF
B. RIP
C. BGP
D. IGRP | | 2 |
| What network design is becoming common when there is a
central office with one or more remote locations?
A. ISDN PRI at the central location and ISDN BRI at the
remote locations.
B. Using core routers at all sites
C. Only using access routers
D. Using a full mesh network | | 1 |
| What are metrics used with IGRP?
A. Ticks
B. Load
C. Hops
D. Delay | | 1 |
| What is the second step when creating a prototype?
A. Develop a test plan
B. Review the customer requirements
C. Investigate what the competition will be proposing
D. Define how big the prototype will be | | 1 |
| 6. Which of these statements best describes VPLS ?
| Pari-Networks | 1 |
| With Centralized Routing, each node must determine and
maintain its routing information independently?
A. True
B. False | | 1 |
| Which of the following are true regarding switched virtual
circuits (SVCs) and permanent virtual circuits (PVCs)?
Choose two.
A. SVCs and PVCs can use the same circuit.
B. PVCs are permanently established virtual circuits.
C. SVCs and PVCs terminate the circuit when data
transmission is complete.
D. SVCs are virtual circuits that are dynamically
established on demand and terminated when data transmission
is complete. | | 1 |
| OSPF supports priority routing for which TCP/IP feature?
A. PA
B. TCP
C. IP
D. SNA | | 1 |
| When is the route to a node determined in an SRB (Source
Route Bridging) Token Ring network?
A. Before any data is transmitted
B. After the data is transmitted
C. During the transmission of data
D. After the first frame is transmitted | | 1 |
| A remote user needs a static IP address to support a
specific application.Which remote access VPN addressing
technique supports this ?
| Pari-Networks | 2 |
| Which of the following three protocols replace SDLC?
A. 802.2
B. HDLC
C. QLLC
D. X.25 | | 1 |
| What address is 12 hexadecimal, resides in the Data-Link
layer, and is burned in the ROM by the manufacturer. | | 1 |
| How does the Spanning Tree Protocol (STP) prevent bridging
loops?
A. By not allowing any redundant paths within the network
B. By calculating the metrics of each path
C. By detecting and logically blocking redundant paths from
the network
D. By creating virtual LANS | HCL | 1 |
| You want to assign IP addresses to a large number of
workstations. What is the best way to do this?
A. Cisco Network Registrar
B. Cisco IOS NAT Feature
C. Assign them static IP addresses
D. Let the workstation assign its own IP address | | 1 |
| What are the three commonly used methods of flow control
used for handling network congestion?
A. Buffering
B. Source-quench messages
C. Error checking
D. Windowing | | 1 |
| What task do you complete to identify organizational
objectives that will reflect your design?
A. Business Objectives
B. Scheduling requirements
C. Vacation time
D. Meetings | | 2 |
| The following are the four steps in establishing an X.25
virtual circuit. Place them in the correct order.
A. The PSE (Packet Switch Exchange) passes the packet to the
next remote DCE
B. The local DCE packet binder sends packet to the closest
PSE (Packet Switch Exchange)
C. The source DTE sends packet to the local DCE
D. The remote DCE examines the packet header of destination DTE | | 1 |
| Which of the following does not specify an application
requirement that affects your network design?
A. The number of users
B. The peak hours that the applications are used
C. The types of applications used
D. Security risks | | 1 |
| |
| For more CCDA Interview Questions Click Here |
To Refer this Site to Your Friends 
Site Map
