When doing an RFP (Request for Purchase) for a customer, at what step do y

Advertise your Business Here

Refer this Site

Login | Sign Up


	Do you have a collection of Interview Questions and interested to share with us!! Please send that collection to along with your userid / name. ThanQ

Categories >> Certifications >> Cisco Certifications >> CCDA

CCNA Interview Questions

CCDA Interview Questions

Question

When doing an RFP (Request for Purchase) for a customer, at
what step do you reiterate your solution and the customer
requirements?

A.	Design Requirements

B.	Design Solution

C.	Summary

D.	Appendices

Question Submitted By :: Guest

I also faced this Question!!

Rank

Answer Posted By

Re: When doing an RFP (Request for Purchase) for a customer, at what step do you reiterate your solution and the customer requirements? A. Design Requirements B. Design Solution C. Summary D. Appendices

Answer
# 1

Answer: C

When doing an RFP (Request for Purchase) for a customer, you
reiterate your solution and the customer requirements at the
Summary step. See our ?CCDA Memorization Lists? under the
heading, ?Preparing a Design Document?

Is This Answer Correct ?

0 Yes

0 No

Guest

Question	Asked @	Answers
Other CCDA Interview Questions


What are the four basic components of an AppleTalk network? A. Sockets B. Nodes C. Networks D. Areas E. Zones		1
EIGRP was developed to improve what two protocols? A. OSPF B. RIP C. BGP D. IGRP		1
The following are the four steps in establishing an X.25 virtual circuit. Place them in the correct order. A. The PSE (Packet Switch Exchange) passes the packet to the next remote DCE B. The local DCE packet binder sends packet to the closest PSE (Packet Switch Exchange) C. The source DTE sends packet to the local DCE D. The remote DCE examines the packet header of destination DTE		1
What device initiates a session in an X.25 network? A. DTE B. DCE C. PSE D. PAD		1
Which IP address is not a private address? A. 142.18.0.0 B. 10.0.0.0 C. 172.16.0.0 D. 192.168.0.0	NetMax	1
When designing a flat switched network you can have: A. the same number of IP and IPX nodes without performance degradation B. more IP than IPX nodes on the same segment C. more IPX than IP nodes on the same segment D. more AppleTalk than IP nodes on the same segment		1
When characterizing a network, how many buffer misses should not be exceeded on a Cisco router per hour? A. 10 B. 25 C. 50 D. 100		1
What set of Frame Relay enhancements offer extensions for managing complex internetworks? A. CMT B. SNMP C. LMI D. RMON		1
What are two services that DUAL (Diffusing Update Algorithm) performs for EIGRP? A. Provides loop-free operation throughout an entire route?s computation B. Simultaneous synchronization of routers involved in a topology change C. Updates the autonomous system number D. Allows advertised distances to use feasible distances		1
Which router would you choose for your design? A. 1600 B. 1700 C. 3600 D. 3640 E. 7200		1
When are SNMP traps sent? A. When the SNMP manager wants to perform remote configuration on a networking device B. When an SNMP agent wants to inform the SNMP manager about a change of state on the networking device C. When the SNMP manager wants to access large chunks of data D. When the NMS wants to share trap information		1
What is the second step when creating a prototype? A. Develop a test plan B. Review the customer requirements C. Investigate what the competition will be proposing D. Define how big the prototype will be		1
A remote user needs a static IP address to support a specific application.Which remote access VPN addressing technique supports this ?	Pari-Networks	2
What are three LAPB features supported by SDLC? A. Frame types B. Frame format C. Field functions D. ABM		1
What are two services that the OSPF Hello protocol provides? A. It discovers neighbor routers B. It gets routes from neighbors during startup C. It helps elect a designated router D. It allows administrator to test for connectivity between two devices		1
How many networks will be advertised using route summarization within an OSPF network if you are given the following networks? 192.108.168.0 192.108.169.0 192.108.170.0 192.108.171.0 192.108.172.0 192.108.173.0 192.108.174.0 192.108.175.0 A. 1 B. 2 C. 3 D. 4 E. 5		1
Match the following services with the correct descriptions: A. BRI 1. Provides two 64 Kbps B channels B. PRI 2. Provides 23 or 30 B channels 3. Provides one 16 Kbps D channel 4. Provides one 64 Kbps D channel 5. Provides a total bit rate of 2.048 Mbps in Europe and Australia 6. Provides a total bit rate of 144 Kbps 7. Provides a total bit rate of 1.544 Kbps in North America and Japan		1
SNMP agents are: A. Management devices B. NMS (Network Management Stations) C. network devices such as routers, switches, or hubs D. PDUs		1
Diagramming application information flow is important because: A. it helps identify heavy traffic paths B. it helps figure out why email gets from one place to another C. it can tell you when to purchase a new router D. it can tell you when to purchase a new switch		2
What happens to performance if the maximum MTU (Maximum Transmission Unit) size is used? A. Performance increases B. Performance decreases C. Performance stays the same D. Performance has nothing to do with the MTU		1

For more CCDA Interview Questions Click Here


Copyright Policy \| Terms of Service \| Help \| Site Map 1 \| Articles \| Site Map \| Site Map \| Contact Us \|

Copyright © 2007 ALLInterview.com. All Rights Reserved.

ALLInterview.com :: Forum9.com :: KalAajKal.com