| Other CCDA Interview Questions |
| |
| Question | Asked @ | Answers |
| |
| What network design is becoming common when there is a
central office with one or more remote locations?
A. ISDN PRI at the central location and ISDN BRI at the
remote locations.
B. Using core routers at all sites
C. Only using access routers
D. Using a full mesh network | | 1 |
| When would you suggest static routes to your customers?
A. When scalability is important
B. When bandwidth is limited
C. When the network will be changing frequently
D. Always suggest static routes | | 1 |
| What are the five areas of the ISO Network Management Model?
A. Performance management
B. Accounting management
C. Flow management
D. Configuration management
E. Operating management
F. Fault management
G. Routing management
H. Security management | | 1 |
| What device initiates a session in an X.25 network?
A. DTE
B. DCE
C. PSE
D. PAD | | 1 |
| What task do you complete to identify organizational
objectives that will reflect your design?
A. Business Objectives
B. Scheduling requirements
C. Vacation time
D. Meetings | | 2 |
| What are two ways to connect a PC to a LAN when using ATM
(Asynchronous Transfer Mode)?
A. ATM endpoint
B. ATM LAPB
C. ATM router
D. ATM switch | | 1 |
| Which of the following three protocols replace SDLC?
A. 802.2
B. HDLC
C. QLLC
D. X.25 | | 1 |
| What is the second step when creating a prototype?
A. Develop a test plan
B. Review the customer requirements
C. Investigate what the competition will be proposing
D. Define how big the prototype will be | | 1 |
| What are two services that the OSPF Hello protocol provides?
A. It discovers neighbor routers
B. It gets routes from neighbors during startup
C. It helps elect a designated router
D. It allows administrator to test for connectivity between
two devices | | 1 |
| 6. Which of these statements best describes VPLS ?
| Pari-Networks | 1 |
| How many networks will be advertised using route
summarization within an OSPF network if you are given the
following networks?
192.108.168.0
192.108.169.0
192.108.170.0
192.108.171.0
192.108.172.0
192.108.173.0
192.108.174.0
192.108.175.0
A. 1
B. 2
C. 3
D. 4
E. 5 | | 1 |
| What address is 12 hexadecimal, resides in the Data-Link
layer, and is burned in the ROM by the manufacturer. | | 1 |
| When are SNMP traps sent?
A. When the SNMP manager wants to perform remote
configuration on a networking device
B. When an SNMP agent wants to inform the SNMP manager about
a change of state on the networking device
C. When the SNMP manager wants to access large chunks of data
D. When the NMS wants to share trap information | | 1 |
| In which category should Frame Relay be placed within the
following Job Aid?
Name of Protocol Type of Protocol # of Users # of Hosts or
Servers Comments | | 1 |
| What are the three commonly used methods of flow control
used for handling network congestion?
A. Buffering
B. Source-quench messages
C. Error checking
D. Windowing | | 1 |
| Which of the following is not true in regards to route
summarization?
A. It increases the size of the routing table
B. It increases the complexity of the network
C. IP networks must be contiguous to be safely summarized
D. Routing tables must have the capacity to support
classless routing | | 1 |
| A remote user needs a static IP address to support a
specific application.Which remote access VPN addressing
technique supports this ?
| Pari-Networks | 2 |
| What set of Frame Relay enhancements offer extensions for
managing complex internetworks?
A. CMT
B. SNMP
C. LMI
D. RMON | | 1 |
| Which Of the Statements best describes VPLS ?
| Pari-Networks | 1 |
| You may receive a case study including Token Ring and
Ethernet, so you may want to look at any constraints with
cabling between Token Ring and Ethernet networks.
Which statement describes the constraints imposed by the
existing network?
A. Replace all cabling
B. Test all cabling
C. Do not replace cabling
D. Use microwave instead of cabling | | 1 |
| |
| For more CCDA Interview Questions Click Here |
along with your userid / name. ThanQ
Site Map
