| Other CCDA Interview Questions |
| |
| Question | Asked @ | Answers |
| |
| Which of the following is not true in regards to route
summarization?
A. It increases the size of the routing table
B. It increases the complexity of the network
C. IP networks must be contiguous to be safely summarized
D. Routing tables must have the capacity to support
classless routing | | 1 |
| Match the following routing techniques with the correct
descriptions:
A. Static Routing 1. Mandatory configuration
B. Dynamic Routing 2. No route updates
3. Can better tolerate failures
4. Sends update when topology changes
5. Path is determined by the router
7. Traffic is reduced | | 1 |
| What set of Frame Relay enhancements offer extensions for
managing complex internetworks?
A. CMT
B. SNMP
C. LMI
D. RMON | | 1 |
| What happens to performance if the maximum MTU (Maximum
Transmission Unit) size is used?
A. Performance increases
B. Performance decreases
C. Performance stays the same
D. Performance has nothing to do with the MTU | | 1 |
| How does the Spanning Tree Protocol (STP) prevent bridging
loops?
A. By not allowing any redundant paths within the network
B. By calculating the metrics of each path
C. By detecting and logically blocking redundant paths from
the network
D. By creating virtual LANS | HCL | 1 |
| Which of the following does not specify an application
requirement that affects your network design?
A. The number of users
B. The peak hours that the applications are used
C. The types of applications used
D. Security risks | | 1 |
| What is not a function of the distribution layer?
A. Routing between VLANs
B. Implement tools such as access lists, packet filtering,
and queuing
C. Implement security and network policies
D. Provide workgroup/user access to the network | | 1 |
| What are the three commonly used methods of flow control
used for handling network congestion?
A. Buffering
B. Source-quench messages
C. Error checking
D. Windowing | | 1 |
| What is the technique used by a router that can
automatically initiate and close a circuit-switched session?
A. PLP
B. LAPP
C. ASN.1
D. DDR | | 1 |
| What are three advantages of using fiber?
A. Security
B. Eliminate RFI and EMI
C. Low cost
D. High speed | | 1 |
| Distance Vector and Link-State protocols converge more
quickly if:
A. there is router redundancy
B. there is router redistribution
C. the update interval is set to its maximum
D. the whole routing table is sent to announce changes | | 1 |
| With Centralized Routing, each node must determine and
maintain its routing information independently?
A. True
B. False | | 1 |
| Match the following routing protocols with their routing
algorithm.
A. OSPF 1. Distance Vector
B. IGRP 2. Link-State
C. RIP
D. IS-IS
E. NLSP
F. RTMP
G. AURP
H. BGP | | 1 |
| What are the five areas of the ISO Network Management Model?
A. Performance management
B. Accounting management
C. Flow management
D. Configuration management
E. Operating management
F. Fault management
G. Routing management
H. Security management | | 1 |
| What is the second step when creating a prototype?
A. Develop a test plan
B. Review the customer requirements
C. Investigate what the competition will be proposing
D. Define how big the prototype will be | | 1 |
| What are two differences between 10BaseT and 100BaseT?
A. Speed
B. Frame format
C. Addressing
D. Network diameter | | 1 |
| Which tools help to characterize a network?
A. Sniffer
B. CiscoWorks 2000
C. Netsys
D. All of the above | | 1 |
| 5. Which Two Settings must be configured in order to use the
GUI to configure Call Admission Control with voice Applications
| Pari-Networks | 1 |
| Match the following services with the correct descriptions:
A. BRI 1. Provides two 64 Kbps B channels
B. PRI 2. Provides 23 or 30 B channels
3. Provides one 16 Kbps D channel
4. Provides one 64 Kbps D channel
5. Provides a total bit rate of 2.048 Mbps
in Europe and Australia
6. Provides a total bit rate of 144 Kbps
7. Provides a total bit rate of 1.544 Kbps
in North America and Japan | | 1 |
| Which condition does not create LAN media problems?
A. Protocol doesn?t scale well
B. Long wait for the token
C. Excessive collisions
D. Too many devices | | 1 |
| |
| For more CCDA Interview Questions Click Here |
along with your userid / name. ThanQ
Site Map
