| Other Electrical Engineering Interview Questions |
|| Asked @
|What is C curve and D curve of MCB?
|what is the current carrying capacity of 725 va generator
|what is the operation of regulator in fan?
|how is working the APFC when varying the load?
|why the motor running in delta connection ? it can be in star?
|what are the particle used along with silica gel in
transformer breether,explain their functions.
|bit confused - am i correct in thinking that to determine
line to line voltage in a star config 110v 3 phase 4 wire
distribution system i would use a voltmeter?
I have a circuit configured as an unbalanced load,
consisting of three incandescent lamps (1x40w, 1x60w,
1x100w - all 110v rated)connected in a star configuration
to a 110v 3 phase 4 wire distribution system.
I want to find out what types of meters i would use to
a) each line to line voltage
b) the line to neutral voltage across each load
c) current flowing in each line and load
d) current flowing in the neutral conductor
e) power supplied to the loads
im assuming i would be using ammeters in series along each
line and voltmeters in parallel across each line to neutral?
Also how could i predict these meter readings before taking
them and with which formulae?
Any help would be greatly appreciated
|what is the difference between PLC and embedded system
|how can get electrical c licence.now i am working in spining
mill , transformer capacity 2750KVA. SANCTION DEMAND 2250KVA.
PLEASE ADVISE ME . MY CONTACT NO 09944226823
|what is the diff between VCB & ABCB breaker in substaions?
explain the operating priciples of VCB & ABCB
|How loading get increased in generator not the speed, while
we increasing steam to turbine.
|phase association of 3PH L&T static CT meter is wrong.
means 1PH & 1 CT connected properly and other 2 voltage and
CT's inter changed. what would be the impact in the reading?
|For more Electrical Engineering Interview Questions Click Here |