| Other CCNA Interview Questions |
| |
| Question | Asked @ | Answers |
| |
| Which two statements about integrated services digital
network (ISDN) are true?
A. ISDN provides data only capability
B. ISDN provides an integrated voice/data capability
C. The ISDN standards define the hardware and call setup
schemes for end the end digital connectivity
D. Users receive more bandwidth on WANS with a leased lin of
56 Cops than with multiple B channels | | 1 |
| What three occurrences will reset the holddown timer after a
triggered update?
A.) Infinity is finally defined as some max number
B.) HD Timer expires
C.) Another update is received indicating a better metric
D.) The router receives a processing task proportional to
the number of
links in the internetwork
E.) The router detects fault LSP's propagating through the
internetwork
F.) Another update is received indicating net status changed | | 1 |
| What is the default interval for SAP updates?
A.) 60 seconds
B.) 15 seconds
C.) 30 seconds
D.) 120 seconds | | 1 |
| how we can creat VPN..??? how it can be configured on cisco
switches..??? can we creat VPN on different networks..???
why we need to create VPN..??? kindly write complete
activity of commands to configure a VPN on switch..??? me
specially looking towards Jatendra and Shahin | | 1 |
| What two types of PPP data compression are available using
Cisco IOS?
A.) Predictor
B.) DoubleSpace
C.) Stacker
D.) PAP
E.) ZIP
F.) CHAP | | 1 |
| Sequence and acknowledgement numbers are used for?
A.) Layer transitioning
B.) Flow control
C.) Port number addressing
D.) Reliability | | 1 |
| Identify the OSI layer which is responsible for end-to-end
connections?
A.) Network
B.) Transport
C.) Session
D.) Data link
E.) TCP | | 2 |
| here is your question sahin
Hi Jitendera, If i m not wrong, then in EIGRP, Metric weight
is set to K1(Bandwidth)=1, K2(Delay)=0, K3(Reliability)=1,
K4(Load)=0, K5(MTU)=0. This is default setting for EIGRP.
I knew about it from ICND 2 cisco press book.
Three more questions -
a) If we change the K value (I mean metric weight)on a
router what will happen???
b) When redistribution is necessary in EIGRP. Is there any
condition for that???
c) What is reference bandwidth for metric calculation in
EIGRP. As we know, in OSPF, on a CISCO router reference
bandwidth is 10Mbps. | | 3 |
| After the command -- router igrp 200 -- what command would
enable
IGRP on the router for interface E0, with an address of
157.89.4.4 and a
mask of 255.255.255.0 ?
A.) network 157.89.4.0 255.255.255.1
B.) network 157.89.0.0
C.) router igrp *
D.) router igrp 157.89.0.1
E.) router igrp int e1
F.) router igrp 157.89.4.1 | | 2 |
| Which layer is responsible for synchronizing sending and
receiving
applications?
A.) Presentation
B.) Session
C.) Transport
D.) Application
E.) Network | | 2 |
| Which command specifies a second subinterface on serial
interface 0?
A. interface s 0.2 point-to-point
B. interface 2 s.0 point-to-point
C. suberinterface 2.s 0 point-to-point
D. interface s 0 sub 2 point-to-point
E. interface s 0.1 point-to-point sub 2 | | 1 |
| On a network design project you determine that a new testing
application requires multiple hosts. These hosts must be
capable of sharing data between each host and an enterprise
server at 10 Mobs bandwidth. Other divisions in the company
use applications that require less than 2 Mobs bandwidth of
the enterprise server. What is your most economical
recommendation?
A. That existing 10BaseT hubs be replaced with 1 00BaseT
hubs to improve overall performance
B. That a router can separate the testing application from
the rest of the network, thus allowing the testing
application more bandwidth.
C. That a switch be installed, so that the enterprise server
can be provided a 100 Mobs pod and each of the testing
application hosts can be given dedicated 10 Mobs pods]
D. That a bridge be placed between the enterprise server and
all other users with the exception of the testing application | | 1 |
| Given the address 172.16.2.120 and the subnet mask of
255.255.255.0. How many hosts are available?
A. 254
B. 510
C. 126
D. 16,372 | | 1 |
| let there are three switch and there are 3 ree valn craed
on each switch that is vlan 2 on first switch valn 3 on 2nd
switch and vlan 4 is cretaed on switch 3
i have implemnted intervlan routin through ciso switchses.
the router is conected through its fa0/1 port by one switch
and and the two switch are trunked with each other
now question is that we want to comuniacte betwwen vlan but
does alse want that only vlan 2 is allow to access internet
(ISP)which is conected through s0 interface of router.and
no any vlan can access that internet.what should be
solution. | | 1 |
| Which addresses are INCORRECTLY paired with their class?
A. 1 to 126, Class A
B. 128 to 191, Class A
C. 1 to 126, Class B
D. 128 to 191, Class B | | 3 |
| What is the difference between RIP & RIPng????
Can anyone explain it..!!!
Thank u in advance. | | 1 |
| What is the routing algorithm used by RIP and IGRP?
A.) OSPF
B.) Link-state
C.) Dynamic
D.) Distance Vector | | 2 |
| Routers can learn about destinations through static routes,
default, or dynamic routing. By default, a router will use
information derived from __________.
A. IGRP
B. RIP
C. IP
D. TCP | pspl | 2 |
| When a Distance Vector routing protocol detects that a connected
network has gone down, it sends out a special routing update
packet,
telling all directly connected routers that the distance to
the dead
network is infinity. This is an example of which routing
technology?
A.) ICMP.
B.) Only Link State routing protocols have this intelligence.
C.) Triggered updates.
D.) Garrison-4.
E.) Split Horizon.
F.) Poison Reverse. | | 1 |
| what is standard and extended acess list?
what are the commands for extended and acess list? | HCL | 3 |
| |
| For more CCNA Interview Questions Click Here |
Ask Questions on ANYTHING, that arise in your Daily Life at 
Site Map
