| Other CCNA Interview Questions |
| |
| Question | Asked @ | Answers |
| |
| What are four benefits that can result from applying ISDN
networking? (Choose four)
A. Full time connectivity across the ISDN is spoofed by
Cisco IOS routers using dial on demand routing (DDR)
B. Small Once and Home Once sites can be economically
supported with ISDN Basic Rate Interface (BRI) servkps
C. ISDN replaces Signaling System 7 (SS7) in the Public
Switched Telephone Network (PSTIC) backbone
D. ISDN can be used as a backup service for a leased line
connection between the remote and central chaps
E. Modem racking and cabling can be eliminated by
integration of digital modem cards on Cisco IOS Network
Acess Servers (NAS) | | 2 |
| Identify the type of hardware required to connect a Token ring
network to
an Ethernet network?
A.) Repeater
B.) TR-Enet
C.) Router
D.) Token Ring to Ethernet translation hub | | 1 |
| Identify 2 characteristics of PPP?
A.) Uses LLC to establish the link
B.) Default serial encapsulation
C.) Support multiple layer 3 protocols
D.) Offers two types of authentication; PAP and CHAP | | 3 |
| A user device that connects to a DCE must be which of the
following?
A.) DTE
B.) CPE
C.) Demarc
D.) DCE
E.) CO | | 1 |
| Identify the type of routing protocol that maintains a
topological
database of the network?
A.) Topological state
B.) Shortest Path First
C.) Link state
D.) Distance vector | | 1 |
| Which command enables directly connected network 199.55.72.0
to be used by RIP?
A. Router(config router)# rip 199.55.0.0
B. Router(config router)# rip 199.55.72.0
C. Router(config router)# network 199.55.0.0
D. Router(config router)# network 199.55.72.0 | | 1 |
| What is the default LMI type for Cisco Routers that are using
Frame-Relay?
A.) Annex D
B.) Q933A
C.) Cisco
D.) IETF
E.) ARPA
F.) Anex A | | 2 |
| What is the command to manually enter a static route?
A.) IP route network
B.) IP route
C.) IP route < destination network>
D.) IP route | | 4 |
| What does the term Base refer to in 100BaseT
A. cabling type
B. singnal type
C. 100 mode type
D. spectrum used
E. speed category | | 2 |
| Which statement about half duplex Ethernet operations is true?
A. With half duplex transmission frames feed into a single
cable in one direction at a time.
B. Half duplex transmission between stations is achieved by
using point to point Ethernet and Fast Ethernet connections
C. Half duplex transmission between stations is achieved by
using point to munificent Ethernet and Fast Ethernet connections
D. Half duplex Ethernet technology provides a transmit
circuit connection wired directly to the receiver circuit at
the other end of the connection | | 5 |
| Which of the following are Distant Vector protocols?
A.) IGRP
B.) RIP
C.) OSFP
D.) EIGRP | | 1 |
| Given the following IP address from the Class B address
range 172.35.21.12. Your network plan requires no more than
126 hosts on a shored. Which value should you use as the
subnet mask?
A. 255.255.0.0
B. 255.255.128.0
C. 255.255.126.0
D. 255.255.255.128
E. 255.255.255.252 | | 3 |
| Which three basic switch functions increase available
bandwidth on the networks? (Choose three)
A. loop avoidance
B. address learning
C. hop count limiting
D. broadcast filtering
E. packet forward/filtering | | 3 |
| Identify the 4 that are WAN technologies?
A.) HDLC
B.) FDDI
C.) 802.5
D.) HSSI
E.) SDLC
F.) Frame Relay | | 2 |
| You have powered on a new router and you want to create an
initial configuration. Which mode should you use?
A. copy mode
B. user mode
C. setup mode
D. startup mode | Enrich | 3 |
| What two types of PPP data compression are available using
Cisco IOS?
A.) Predictor
B.) DoubleSpace
C.) Stacker
D.) PAP
E.) ZIP
F.) CHAP | | 1 |
| Which commands will restart the router?
A.) router#system exit
B.) router >reload
C.) router#shutdown
D.) router#reload
E.) router#(config)reload
F.) router#system restart | | 6 |
| Identify the order of the 5 step encapsulation?
1. Create the segment
2. Convert the frame to bits
3. Create the packet
4. Create the frame
5. User creates the data
A.) 1,2,4,2,5
B.) 2,1,3,4,5
C.) 5,1,3,4,2
D.) 5,3,4,1,2 | | 1 |
| What is the Function of Router? | | 4 |
| Which 2 commands shows the Cisco IOS filename?
A.) show IOS
B.) show ver
C.) show flash
D.) show mem
E.) show NVRAM | | 1 |
| |
| For more CCNA Interview Questions Click Here |
Did you received any Funny E-Mails from your Friends and like to share with rest of our friends? Yeah!! you can post that stuff 
Site Map
