Back to Questions Page 
Question 
Numerical Ability
Problems on ages,problems on trains,time and work,pipes and
cisterns.... 
Rank 
Answer Posted By 
Interview Question Submitted By :: Guest 
I also faced this Question!! 
© ALL Interview .com 
Answer 
Prolma in age 27 on a Teain Time 7.00pm and i am working 
1  Manhar 


Question 
how do we calculate quantity of cement , sand and
aggregates in 1 m3 of M30 grade concrete ? 
Rank 
Answer Posted By 
Interview Question Submitted By :: Nsewani 
I also faced this Question!! 
© ALL Interview .com 
Answer 
1:1:2 
3  Ratul 


Answer 
In the case M30 concrete we calculating by design mix.but
incase of norminal mix we can use 1:1:2.
calculating cement, sand and concrete.
toal ratio=1+1+2=4
cement = 15.4/4=3.85cum=11bags
sand=3.85*1=3.85 cum
chips=3.85*2=7.7 cum
Notes: why we divided 15.4
but it is difficult to acess exactly the amount of each
material recquired to produce 1cum.of wet concrete when
deposite in place.
to find out volumes of cement sand & coarse aggregate
divided a numerical no. 15.4 variable up to 15.7 according
to proportioning and water cement ratio by the summation of
the proporation of the ingrediants used and then multiply
the result thus obtained their respective srength of
proportion. 
3  Sjtbehera [ESSAR CONSTRUCTION INDIA LTD.] 




Answer 
M30 cement=1/4*1.54=0.385*28.8=11bags
sand0.385*1=0.385cum
agregate 0.385*2=0.77cum
Notes;why we multiply by 1.54
dry dencity=1.54*wet denciti in conct.work 
0  Sachdeva D.p [ESSAR CONSTRUCTION INDIA LTD.] 


Answer 
If you Consider M25 Grade Concrete Nominal mix Design is
1:1:2(1 Cement:1 Sand:2 Aggregates)
1+1+2=5
Volume of Dry Mix=1.5% X Volume of wet mix
If you Consider 1 Cum Concrete
Cement=1/5X1.5(1)=0.3 Cum(1 Bag of Cement=50 Kgs=1.235
Cft=0.035 Cum)
Then 0.3 /0.035=8.57 bags=428 kgs
Sand=1/5X1.5(1)=0.3 Cum=10.584 Cft
Aggregates=2/5X1.5(1)=06 Cum=21.168 Cft 
0  Sateesh Patil [ESSAR CONSTRUCTION INDIA LTD.] 


Answer 
if we consider concrete grade M20(1:2:3)
1+2+3=6
wet volume 1.58cum
cement = 1/6x1.58=0.26cum
volume of one bag of cement = 0.033cum
total quantity of cement bag one CUM concrete =0.26/.033=7.87bags
7.87x50 kg=393kg 
0  Randeepchaudhary [ESSAR CONSTRUCTION INDIA LTD.] 


Answer 
The approach by Sjtbehera is totally correct but has some
little silly mistakes...I have tried to give a rectified
solution.
In the case M30 design mix, the quantities of cement,sand
and aggregates cannot be calculated as it is a variable
quantity.It depends upon the Mix designer how much quantity
of cement,sand and aggregates he will employ.His only
intention would be to design a mix whose specified
characteristic compressive strength at 28 days=30 N/sq.mm
But in case of nominal mix we can use 1:1:2
Let us consider a volume of 10 cu. m (Wet concrete)
It is difficult to access exactly the amount of each
material required to produce 10 cu m of wet concrete when
deposited in place.
Hence to convert the wet volume into dry volume,
Increase by 54 % to account for shrinkage and wastage
Thus it becomes=15.4 cu. m (Variable upto 15.70)
Calculating cement, sand and aggregates in the mix:
Total summation of proportion=1+1+2=4
Cement = 15.4/4= 3.85 cu. m =3.85/0.0347=110 bags
Sand=15.4/4=3.85 cu. m
Aggregates(20mm to 6mm)=15.4 x (2/4)=7.70 cum
Hope u have understood and the mistake is clarified!!! 
0  Rajarshi Basu [ESSAR CONSTRUCTION INDIA LTD.] 


Answer 
Take a Ratio 1:1.5:3
Now 1+1.5+3= 5.5
Now Divide This By 1.52 Which Is wet Volume
Now 1.52/5.5 =0.276
Now Multiply This by 30 Coz 1 Cum Of Cement Contains 30
bags dry.
==> 0.276 X 30 = 8.29 Bags Or 414 Kg cement. 
3  Rahul Mehta J.e [ESSAR CONSTRUCTION INDIA LTD.] 


Answer 
for designing 1m3 concrete of M25 mix the ratio is 1:1:2
for calculating cement,sand and course aggregate ,
cement= 1/(1+1+2)=.25
density of cement =1440kg/m3
cement required for this mix=1440*.25=360kg=6bags+10kg
sand=1/4=.25m3
course aggregate=1.5=.5m3
this methode of designing is known as volume batching ,this
methode will be ues to design mixes upto m25. 
0  Subilash .s(civil Engineer) [ESSAR CONSTRUCTION INDIA LTD.] 


Answer 
for m30 grade .we have to calculate the quantity of all
ingredients of concrete by design mix as per IS
102622009.it depends upon the whether admixture is used or not. 
0  Samsulhoque@jadavpur Universit [ESSAR CONSTRUCTION INDIA LTD.] 


Answer 
take the ratio 1:1.5:3
cement =1
sand =1.5
metal =3
So what is the ratio we want to mixing 1+1.5+3=5.5
Volum of wet cement concret is 1.54 to 1.57
unit weight of cement bag is 1440 kg/cum
one bag of cement = 50/1440 = 0.034722 cum
SOLUTION : CEMENT = 1.54/5.5 =0.28
=0.28/0.0347 = 8.069 ( 8 bags)
one bag of cement =50 kg X 8.069 = 403.45 kgs.
SAND solution =0.28 X 1.5 = 0.42 Cum
1.5 is the mixing proportion
METAL SOLUTION = 0.28 x 3 = 0.84 cUM.
3 is the mixing proportion
1 Cum cement concrete is 1:1.5:3 ratio
cement = 403.45 kgs.
sand = 0.42 Cum.
metal = 0.84 Cum. 
0  Ranga [ESSAR CONSTRUCTION INDIA LTD.] 


Answer 
M30 means , proportion 1:1:2 , so that
Total Volume = 1m3
we take 52% extra for dry volume , miss handling etc then ,
total volume = 1* 1.52 = 1.52 m3
Quantity of cement required = 1.52/(1+1+2)=0.38/0.035= 10.857bags = 11 bags
Quantity of sand required = 0.38*1=0.38m3
Quantity of aggregate required = 0.38*2 = 0.76m3 
0  Tukuna Das [ESSAR CONSTRUCTION INDIA LTD.] 


Answer 
Take the retio 1:1.5:3
Cement = 1
Sand = 1.5
Aggregates = 3
The volume of none mixed material is 1.52 m3 for one cu.m
mexid concret becouse the the aggregate sand and cement
have porosity that will fill with some of sand and
cement,so 1.52/(1+1.5+3)=1.52/5.5=0.276
Cement=0.276*1=0.276 cu.m = 0.276/0.036*50 bag = 383kg
0.036 is one bag volume
Sand = 0.276*1.5 = 0.414 cu.m
Aggregate = 0.276*3 = 0.828 cu.m
0.276+0.414+0.828=1.518 near to 1.52 
0  Enayatullah [ESSAR CONSTRUCTION INDIA LTD.] 


Answer 
first of all We should conseder in our colculation the
ratio of cement,Sand , aggregate and water cement ratio
which we have received from mix design test 
0  Engineer M.aziz [ESSAR CONSTRUCTION INDIA LTD.] 


Answer 
For m30 8 bags cement 
0  Fsdfsdfsdfs [ESSAR CONSTRUCTION INDIA LTD.] 


Answer 
M30 Grade Concrete=
Ratio1:1.5:3
1mq concrete
Cement => 1*1/5.5=.182 (5.5=Mixing)
=> .182*1.5=.273 (1.5 *dry moisture)
=> .273*30 = 8.19 (8 bags /409.5kg)
Send => 1*1.5/5.5 =.273
=> .273*1.5 =.410 mq
Aggregate => 1*3/5.5 =.545
=> .545*1.5 =.818 mq 
0  Manish Singh [ESSAR CONSTRUCTION INDIA LTD.] 


Answer 
plz explain this 
0  Akheel [ESSAR CONSTRUCTION INDIA LTD.] 


Answer 
Dry Density of the concrete mix=15.4 to15.7
If we consider M30 mix is 1:1:2 than sum of the proption =4
Now calculate the quantity of cement= 15.4/4=3.85cu m
1.00cum have 30bags cement
So 1 bag cement=0.034 cum
3.85/0.34=11.32 bags
11.32*50=339.6 KG`
Sand=3.85cum
coarse aggregate=3.85*2=7.7 cum 
0  A P S Chandel [ESSAR CONSTRUCTION INDIA LTD.] 


Answer 
Calculation for Cement:
100 cft of conc in loose 144 to 154 cft required,average of
144 and 154 is 149 cft say 150 cft.
M25 = 1:1:2=4
150cft/4=37.5cft
37.5cft/1.2=31.25bags [1 bags of cement is 1.2cft]
=31.25/2.83=11bags [1 cft = 0.0283cum x 100 cft=2.83cum]
per cum cement required=11bags
Calculation for Sand:
11bags x 1.2 cft = 13.2 cft = 13.2 x 0.0283=0.374 cum
Per cum sand required = 0.374cum
Calculation for Aggregate:
=0.374 x 2 = 0.747 cum
per cum Aggregate required = 0.747 cum 
0  K.nabadwip Sharma [ESSAR CONSTRUCTION INDIA LTD.] 


Answer 
i wanna consruct a wall having length 1450 RFT so i wanna calculate how much cement and sand is required??? 
0  Rocky [ESSAR CONSTRUCTION INDIA LTD.] 


Answer 
Take The Ratio  1:1.5:3
For 1 cu.m wet volume consider its dry volume 54% more
i.e = 1.54 cu.m of concrete.
Total Volume of concrete for Mix= 1.54/1+1.5+3 = 0.28 cu.m
Total quantity of cement for Mix= 0.28/1 = 0.28 cu.m
Total quantity of cement in bags= 0.28/0.035 = 8 bags
Total quantity of Metal for Mix= 0.28/1.5 = 0.187 cu.m
Total quantity of sand for Mix= 0.28/3 = 0.093 cu.m 
0  Misal Dinesh [ESSAR CONSTRUCTION INDIA LTD.] 


Answer 
For M30 nominal mix, considering the ratio (1:1:2),
Cement = 1
Fine Agg = 1
Coarse Agg = 2
Total = 1+1+2=4
Considering the above ratio in grams i.e, (cement = 1 gm, Fine agg = 1 gm, Coarse agg = 2 gm) then
For 1 cum, 1/4 = 0.25 % will be filled.
Now, Volume of 1 bag of cement is 35 litres or 0.035 mL
Since, to maintain W/C ratio, the amount of cement & water should be equal.
Therefore, 1 gm of cement will require 0.035 mL of water.
0.25/0.035 = 7.15 approx. Bags or 357.5 kg of Cement.
or consider like this
1/((1+1+2)*0.035) = 7.15 approx. Bags or 357.5 kg of Cement (7.15 * 50 = 357.5), here ratio is 1 therefore 1*50=50
Fine Agg = 357.5 kg (7.15 * 50 = 357.5), here ratio is also 1 therefore 1*50=50
Coarse Agg = 715 kg (7.15 * 100 = 715), here ratio is 2 therefore 2*50=100
Adding all, 357.5+357.5+715 = 1430 kg 
0  Kavinder [ESSAR CONSTRUCTION INDIA LTD.] 


Answer 
how to calculate FA & CA in KG...? pls Give me ans i dont know... 
0  Kunal [ESSAR CONSTRUCTION INDIA LTD.] 


Answer 
how do we calculate quantity of cement , sand and
aggregates in 1 m3 of M7.5 grade concrete ? 
0  Deepa [ESSAR CONSTRUCTION INDIA LTD.] 


Answer 
M30 design..Cement:1/4*1.54=.385*28.8=11bags per cuM,Sand:.385*1=.385cuM,because dry density 1.54=wet density 1.54 in concrete work 
0  Rahul Mehta (g.m. Projects) [ESSAR CONSTRUCTION INDIA LTD.] 


Answer 
for designing 1m3 concrete of M25 mix the ratio is 1:1:2
for calculating cement,sand and course aggregate ,
for 1m3 add 50% for shrinkage and wastage so 1.5m3
1.5m3/(1+1+2)=.375
density of cement =1440kg/m3=says 1440/50=28.8bags
cement required for this mix=.375*28.8=10.8bags
sand=.375*1=.375m3
course aggregate=.375*2=.75m3
FINALLY WE SAY 10.8 BAGS/M3 
0  Prakash Pandiyan [ESSAR CONSTRUCTION INDIA LTD.] 


Answer 
Grade M30 Ratio is 1:1.5:3
I am telling simple concept
Add the ratio 1+1.5+3=5.5
assume approximate volume for 20mm aggregate =1.57
40mm aggregate =1.52
Qty of cement 1/5.5*1.57=0.28m3
Density of cement =1440kg/m3
Weight of cement per m3=1440*0.28=403.2kg/m3
per bag=403.2/50=8.02bag
Qty of fine aggregate=1.5/5.5*1.57=0.428kg/m3
Qty of coarse aggregate=3/5.5*1.57=0.856kg/m3 
0  Rajasekar [ESSAR CONSTRUCTION INDIA LTD.] 


Question 
Plz give me the latest syllabus of sbi clerk exam 
Rank 
Answer Posted By 
Interview Question Submitted By :: Rajiv 
I also faced this Question!! 
© ALL Interview .com 
Answer 
i want sbi new syallbus 
4  S.vijaya Lakshmi 


Answer 
I want to question paper of last Sbi examination kinldy
send to me my id pleaseif it have anyone? 
0  Nimesh Prajapati 


Answer 
pls provide me the SBI clerk exam for all subjects.
English/Maths/General Awareness/Marketing/Mental
Ability/Computer Knowledge 
0  Mona Sharma 


Answer 
sbi clerk exam 
0  Sadashiv 


Answer 
plz new sbi clecrk exam sllabus sen in my rediff id my id
is "i_lovenature@rediffmail.com" ok thanks 
0  Prathvi Raj 


Answer 
pls provide me the SBI clerk exam for all subjects.
English/Maths/General Awareness/Marketing/Mental
Ability/Computer Knowledge 
0  Raj 


Answer 
kindly mail me latest syllabus of sbi clerical on id
wpky86@rediffmail.com thanks 
0  Pankaj 


Answer 
pls provide me the SBI clerk exam for all subjects.
English/Maths/General Awareness/Marketing/Mental
Ability/Computer Knowledge 
0  Rayalla.manohar 


Answer 
plz inform me the syllabus 
0  Mayank Kumar 


Answer 
can i know the syallabus of sbi 
0  Shankar 


Answer 
i want sbi new syallbus 
5  Abdul Malik 


Answer 
yes 
0  Praveen Kumar 


Answer 
Plz send me
sbi syallbus 
0  Raj Kumar 


Question 
pick out the number which is different from other four.
a) 49 b)25 c)36 d)81 e)64
plz specify the reason.... thanks 
Rank 
Answer Posted By 
Interview Question Submitted By :: Francis 
I also faced this Question!! 
© ALL Interview .com 
Answer 
the above are the square of 5,6,7,8,9 and from this 7 is a
prime number which is different from other so the odd one is 49. 
2  Archana 


Answer 
but Archana, 5 is also a prime number know? 
0  Francis 


Answer 
The answer will be 81, because its square root is 9 and 9
has also its square root 3. 
1  Heyyrashmi 


Answer 
the answer is 81 , because it as suare root 9 and cube root
3 
0  Hamsa 


Answer 
e.becoz remaining alla options r squares of numbers 7,5,6,9. 
0  Abhisai 


Answer 
Answer is 49.
Because 5*5=25
6*6=36
8*8=64
9*9=81
49 is not comming any where. 
0  S.jayanthi 


Answer 
Answer is 64
because 64 is cube of 4
others are only squre no 
0  Abhay 


Answer 
answer is 81 because 81 is
3*3*3*3=81 
0  Kashif.khirwa 


Answer 
The ans is 64..Bcoz both no's are even no's...All other
no's having one odd no... 
0  Bakya 


Answer 
The answer is 81 because thats the only number which is a fourth power of an integer 
0  Mendi 


Answer 
These r the square of 7,5,6,9 and 8.if u stress on ur mind
u see sum of all these two digit like 4+9 =13, 2+5 =7, 3+6
=9 and 8+1 =9 is an odd no. but when u add 6+4 =10 it is an
even no. so different no.64 
0  Samar Khan 


Answer 
64 is ans bcoz
when its 4+9=13
2+5=7
3+6=9
8+1=9
so u get different no 64 among otners num . & d"nt
have sq root. 
0  Navinmechengg 


Answer 
D is the answer 
0  Sunil902 


Answer 
answer is : 64
since sum of digit is even and sum of all the other no's
digits is odd. 
0  Lavkush 


Answer 
all this numbers are square root i.e. 7*7 5*5 6*6 9*9 8*8 
0  Joy Thomas 


Answer 
e.64
sum of both digit is even , rest are odd 
0  Guest 


Answer 
64 becoz 64 is a cube root of 4 
0  Shaily 


Answer 
a)49
7*7=49
7 is prime number and odd number.
49 is divisible with no other number.
b)25
5*5=25
5 is prime number and odd number.
25 is divisible with no other number.
c)36
6*6=30
6 is even number.
36 is also divisible by 2,3,4,9,12.
d)81
9*9=81
9 is odd number.
81 is not divisible by no other number.
e)64
8*8=64
4*4*4=64
64 is square of 8 and cube of 4.
ans:ans is 64 
0  Somesh 


Answer 
answer 36 because
49=7*7
25=5*5
36=2*2*3*3
81=3*3*3*3
64=2*2*2*2*2*2
all others have same factors except 36
so answer is C 
0  Atul 


Answer 
49=7*7
25=5*5
36=6*6
64=4*4*4
81=3*3*3*3
so,81 is the answer 
0  Anitha 


Answer 
Ans is(E). Because only 64 is cube root.
64= 4*4*4 
0  Mithlelsh Kumar 


Answer 
25=1 even number,1 odd number
36=1 odd number,one even number
49=1 even number,1 odd number
64=1 even number,1 even number
81=1 odd number,1 even number
so 64 is the odd int the series 
0  Archana 


Answer 
64..
because 2^6=64.and it is also square of 8 i.e 8^2=64
where as remaining numbers are just square of the specific
number. 
0  Shaheen 


Answer 
5*5=25=2+5=7
6*6=36=3+6=9
7*7=49=4+9=13
8*8=64=6+4=10
9*9=81=8+1=9
so the answer is 64 coz there addition can be divided by 2 and nothing else can be divided by 2 
0  Akshay Patil 


Question 
hai,i am apply 4 AAI Jr.Executive(ATC) & Electronics plz
send me the model question papers.
with regards,
a.m.senthil kumar
e mail ID:kumar.sen@sify.com 
Rank 
Answer Posted By 
Interview Question Submitted By :: A.m.senthil Kumar 
I also faced this Question!! 
© ALL Interview .com 
Answer 
am also search tis same

0  Sreee 


Answer 
hai, iam also in search of model question papers for Jr
Executive(ATC). If u have any, kindly forward to me. I
would be very much thankful to u. My email id is
nimisha_eie@yahoo.co.in / niharika.nimisha@gmail.com 
2  Nimisha_eie@yahoo.co.in 


Answer 
Hey, I ahev an exam for 4 AAI Jr.Executive(ATC) &
Electronics on 20 Dec 2009,
Can some one help me with a latest model paper and pattern
of the exam.
Regards,
Shanthan,
Krishna_Shanthan@yahoo.com
krishnashanthanster@gmail.com 
0  Shanthan 


Answer 
hi i too hav applied for the aai's jr. executive(ATC) exam.
can some please help me out with a model question paper.
Regards,
ASHWINI.
ash.metri@gmail.com 
0  Ashwini 


Answer 
Notice for written exam held on 20122009 for the post of
Jr. Executive (ATC) 
0  Maro 


Answer 
i am also trying the same thing but i didnt get it.
some detalis about AAIATC(airport traffic controller) exam pattern on this site www.atcguild.com so check out .... 
0  Vinu Shivas 


Answer 
hi..
i could only see the qualifications required and some other
history and stuffs not the exam pattern.plz guide.
thank you 
0  Ashwini 


Answer 
hello friends,
for written exam prepare ur technical subjects.the ques r
very easy. mostly based on communication (refer ojective
ques from kennedy), few frm networks, frm computer science etc.
paper also contain large portion of aptitude test( refer rs
agrawal) and english and general knowledge 
0  Pratibha 


Answer 
Hi friends,
I am looking for the model test papers.
Glory
glory_jack2000@yahoo.com 
0  Glory 


Answer 
hai,i am apply for AAI Jr.Executive(ATC) & Electronics please
send me the model question papers.and the written exam will
be held on Multiple choose or Question and answer, Inform
that to Newly Written the exam candidates as mostly heplfull.
with regards,
P.pushparaj
e mail ID:power.pushparaj@gmail.com 
0  P.pushparaj 


Answer 
hai,i am apply 4 AAI Jr.Executive(ATC) & Electronics plz
send me the model question papers.
with regards, 
0  Kathirvel 


Answer 
can some one help me with a exam new pattern 
0  Mohan 


Answer 
Hai, I applied For Jr Exective (A T C) Examination July
2010.so any one plz send me the syllabus and old question
paper models to
arunc11@yahoo.in 
0  Arun 


Answer 
hi all i've also applied for AAI Jr Executive july 2010 and i'm basically from IT PLz send me some model question papers for it...
with regards, 
0  Kavitha 


Answer 
hi all, does anyone know if mechanical students are also
applicable for atc or not???
plz reply me at mukulsharma@live.in
thnx.. 
0  Mukul 


Answer 
hi freinds,
can we apply for two posts in AAI...i.e., for ATC &
J.r. executive(IT)??????? plz friends help me...... 
0  Kav5 


Answer 
i am also applied for the AAI jr executive (electronics/ATC) written test. pls forward me the syllabus & test pattern if any question papers, any one got reply for this quaries? if any one know plz reply to me on my email avinashsharmait14@gmail.com 
0  Avinashsharma 


Answer 
pls help me too to knw the pattern.....with regards
id: dwarka7456@gmail.com 
0  Dwarkanath 


Answer 
hai,i am apply 4 AAI Jr.Executive(ATC) & Electronics plz
send me the model question papers.
with regards,
vt.mrudul@gmail.com 
0  Mrudul 


Question 
3. Financial Management
What will your outlook towards maintenance of liquid assets
to ensure that the firm has adequate cash in hands to meet
its obligation at all times?

Rank 
Answer Posted By 
Interview Question Submitted By :: Nareenvaishu 
I also faced this Question!! 
© ALL Interview .com 
Answer 
PROJECTED CASH FLOW STATEMENT BE THE GUIDED STICK. OUR
SALES, REALISATIONS, AND FIXED AND VARIABLE EXPENSES NEED
TO BE KEPT IN MIND WHILE JUDGING THE BALANCED NEED OF
LIQUID ASSESTS. WE MAY CONSIDER THE SHORT TERM INVESTMENTS
WITH REFERENCE TO INTEREST RATE AND SURPLUS FUNDS. 
3  Ak Gupta 


Answer 
first we need to project the cash flow statement, and
employee the companies fund in short term investment.alonge
with that we have to check expenses.and maintain the
liquied assets/ 
1  Naz [Desmo Exports Ltd] 


Answer 
i want answer 
0  Narsimulu [Desmo Exports Ltd] 


Answer 
Generally speaking, you must limit expenses and ensure that
some of your assets are in the form of short term assets.
The higher your short term assets and the less your short
term debt, the better your ability to pay the debt (short
term liquidity ratio / liquidity ratio help you determine
this).The ratio analysis will be the guide stick for the
liquidity ratio. 
0  Suman [Desmo Exports Ltd] 


Question 
I WANT TO KNOW DIFFERNCE BETWEEN UPSC AND CIVILS SERVICES 
Rank 
Answer Posted By 
Interview Question Submitted By :: Appu 
I also faced this Question!! 
© ALL Interview .com 
Answer 
Union Public Service Commission(UPSC) is an organisation
which conducts examinations for various Central Government
posts mostly at graduate level. Civil Services is the top
most examination conducted by UPSC for posts like IAS, IPS,
IFS, IRS, etc. 
5  Jay Kay 


Answer 
if you want to go in railway service for the post of
computer science engineer then in this case upsc is the
best option,since by the help of ies exam you can get the
top level services in india. 
0  Sagar Mamodiya 


Question 
Journalise the following Entries?
Outstanding salary of rs. 20000/
Prepaid insurance of rs. 5000/ 
Rank 
Answer Posted By 
Interview Question Submitted By :: Anjali 
I also faced this Question!! 
© ALL Interview .com 
Answer 
outstanding salary a/cdr 20000
to salary a/c 20000
insurance a/c dr 5000
to prepaid insurance a/c 5000 
0  Venkata Subbaiah 


Answer 
Salary a/c dr. 20000
to outstanding a/c 20000
Prepaid insurance a/c dr. 5000
to insurance a/c 5000 
4  Anjali 


Answer 
staff salary a/c dr....20000
to salary payable a/c.........20000
here staffsalary are shown in p&l a/c and salary payable a/c
is shown in the liability side of the balace sheet as
current liability
prepaid insurence a/c dr......5000
to cash/bank.......................5000
here
prepaid insurence is shown in the asset side of the balance
sheet as current asset 
0  Sajeermoidu 


Answer 
question not clear 
0  Sukesh 


Answer 
1, SALARY A/C DR 20000
TO SALARY OUTSTANDNG 20000 , HERE SALARYIS
OUTSTANDING SO THIS IS CURRENT LIABILITY , SALARY WILL GO
TO P&L A/C EXPENSE
2, PREPAID INSURANCE A/C DR
TO BANK / CASH , PREPAID INS. IS CURRENT ASSET 
0  Nidheesh 


Answer 
Dear Venkata Subbaiah garu It seems you answered it in a
hurry mood
1. Outstanding salary means Expenditure incurred but not
paid.Ex. March month salary paid in April. To know true
and correct profit You have to Debit salaries account and
credit Payables a/c . So the entry will be
Salaries a/c Dr 20,000/
Outstanding salaries a/c 20,000/
(Being payable salary for the month brought into account)
2. Prepaid Insurance means A part of premium belongs to
next accounting year. So to take actual amount of insurance
expenditure into account you have to transfer such amount
which relates to next year. So the entry will be
Prepaid Insurance a/c Dr
To Insurance a/c
By crediting the expenditure we are reducing the
expenditure to the tune of next accounting year. 
0  Mudunoori 


Answer 
Sajeer saab You did a mistake in the second answer. Prepaid
insurance is an adjustment entry to be passed in the year
end. Insurance was already paid and entry was passed . with
your entry cash will be unnecessarily reduced to the tune
of 5000. So once again verify your answer and question. The
right answer is
Prepaid Insurance a/c Dr
Insurance a/c
(Prepaid insurance was created and reduced from insurance ) 
0  Mudunoori 


Answer 
mr mudnoori, ihave a doubt, can we credit an expense?,as
insurence is an expense.here mr sajeer may be cosidering
insurence paid on march, which belongs to april so his
entry is correct,otherwise entry will be pass as follows
prepaid insurence a/c dr..........
to cash/bank........cr
(being insurece paid for one year)
then monthly entry is
insurence a/c dr.........
to prepaid insurence.......cr 
0  Areena 


Answer 
Areena very good question put by you. Insurance is not
related to Aprils expenditure. Generally Genaral insurance
will be paid for a period of one year. It is quite usual to
pass an adjustment entry for the expenses which benifits
more than a year.More over to reduce the ependiture or
income we have to reverse the natural poostion of ledger
accounts.So crediting expenditure is quite justifiable. To
confirm my answer you can refer any practicing person or
our commerce books. Another example for recersing entry is
about fixed assets. The natural position of fixed assets
are always DEbit. While creating depreciation on asset we
are reversing the natural position into credit
I think you may be satisfied with my answer.Pl refer
if any thing thru this or with my mail
id.satyaki_raju@yahoo.co.in 
0  Mudunoori 


Answer 
Very interesting discussion between you and Mudunoori.
Prepaid Insurance is an asset and will on assets side of
Balance Sheet. But according to you Prepaid insurance was
closed. So thin well before answering any question. Another
thing I want to comment is the Question is not properly put 
0  Annapoorna 


Answer 
salary a/c dr. 20000
to outstanding or salary payable a/c 20000
Prepaiad insurance a/c dr. 5000
to insurace Premium a/c 5000 
0  Smart 


Answer 
1.
Salary A/c Dr Rs 20,000
To Salary Outstanding A/c Cr Rs 20,000
( Being salary outstanding)
Note: since salary is anture of expese therefore debited
and salary outstanding means salary not yet paid therefore
is a current liability. thus will be credited.
2.
Prepaid insurance A/c Dr Rs 5,000
To cash/Bank A/c Cr Rs 5,000
( Being insurance paid in advance )
Note: Since insurance is paid in advance therfore is a
current asset.Hence ill be debited and cash decreases or
goes out so will be credited. 
0  Baseer Tawheedi 


Answer 
1
Salary A/C Dr. 20000
To Outstanding Salary A/C 20000
Note
bcoz this salary relates to the current year, but not paid
during the C.Y so our liability increases and increase in
liability must be credited, therefore i have credited
outstanding salary a/C.
2.
Prepaid Insurance A/C Dr. 5000
To Insurance A/C 5000
Note
This insurance exp. relates to the next year but we have
paid it in current yr in advance,so our asset increases and
increase in asset must be debit therefore I have debited
Prepaid Insurance A/C 
0  Surabhi Gupta 


Question 
CETRAL BANK OF INDIA call letter?????
Has any body got it for the written exam date 16.08.09 
Rank 
Answer Posted By 
Interview Question Submitted By :: Mamu 
I also faced this Question!! 
© ALL Interview .com 
Answer 
hii me too applied for central bqnk po exam. still didnt
get the hall ticket. In application form itself they
informed to wait till 10th august. 
0  Mythili 


Question 
Write a C++ program without using any loop (if, for, while
etc) to print numbers from 1 to 100 and 100 to 1;

Rank 
Answer Posted By 
Interview Question Submitted By :: Smkalidoss@yahoo.com 
I also faced this Question!! 
© ALL Interview .com 
Answer 
we can create our own header file having a function to
print nos with loop and then use that header file in new
prog with the functoin defined in it. 
0  Harpreet Kaur 


Answer 
I guess, if it is not asking for any kind of loop (for /
while) then one can use recursive functions to achieve this. 
3  Manish Verma 


Answer 
We are using 'goto' statement to print the numbers without using
if,for,while etc. 
0  Kt Vikram 


Answer 
goto statment is also right because goto statement is not a
loop
e.g.
void main()
{
j:
printf("type your text here");
goto j;
} 
0  Gandhi Priyank 


Answer 
main()
{
int i =100;
start:
if( i == 0)
goto end;
printf(" %d ",i)
i;
goto start;
end:
printf(" end of the program");
} 
0  Pur 


Answer 
We can do that by recursive call.....
void fun(int no ){
int t;
printf("%d ",no);
if( no != 100 ){
t=no+1;
fun(t);
}
printf("%d ",no);
}
int main(){
fun(1);
return 0;
} 
0  Bitan Biswas 


Answer 
#include<conio.h>
#include<stdio.h>
void main()
{
int i;
clrscr();
printf("\n the value of the 100 to 0 \n");
for(i=100;i>0;i)
{
if(i==0)
{
goto start;
}
printf(" %d\t",i);
}
printf("\nthe value of the 0 to 100 \n ");
start:
if(i==100)
{
goto end;
}
printf("%d\t",i);
i++;
goto start;
end :
printf("End of the program");
getch();
} 
0  Govind 


Answer 
#include<stdio.h>
void print_1_to_100(int n);
void print_100_to_1(int n);
int main()
{
print_1_to_100(1);
return 0;
}
void print_1_to_100(int n)
{
printf("%d\t",n);
(n/100)? print_100_to_1(n) :print_1_to_100(n+1);
}
void print_100_to_1(int n)
{
printf("%d\t",n);
(n1)? print_100_to_1(n1) :1;
return;
}
//SAMPLE OUTPUT
1 2 3 4 ....100 100 99 98 ...2 1 
0  Om 


Answer 
#include<stdio.h>
#include<conio.h>
void main()
{
clescr();
int i,chl,start;
printf("enter the number from 1 to 100\n");
scanf("%d",ch);
else
go to start
start=1 to 100;
else
go end
exit(0);
} 
0  Balaji.k 


Answer 
#include<iostream>
int i;
class A
{
public:
A(){cout<<i++<<endl;}
~A(){cout<<i<<endl;}
}
int main()
{
A a[100];
return 0;
} 
0  Sandy 


Answer 
int main(int argc, char* argv[])
{
static int i=1, j=100;
(i==101)? i=i: main(printf("%d ", i++), NULL);
(j==0)? j=j: main(printf("%d ", j), NULL);
return 0;
}
// Output
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
48 49 50 51 52 53 54 55 56 57 58 59 60 61 62
63 64 65 66 67 68 69 70 71 72 73 74 75 76 77
78 79 80 81 82 83 84 85 86 87 88 89 90 91 92
93 94 95 96 97 98 99 100 100 99 98 97 96 95
94 93 92 91 90 89 88 87 86 85 84 83 82 81 80
79 78 77 76 75 74 73 72 71 70 69 68 67 66 65
64 63 62 61 60 59 58 57 56 55 54 53 52 51 50
49 48 47 46 45 44 43 42 41 40 39 38 37 36 35
34 33 32 31 30 29 28 27 26 25 24 23 22 21 20
19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3
2 1 
0  Raja Dt 


Answer 
void main()
{
int i;
V:
printf("%d",i++);
goto V;
} 
0  Solairaja 


Answer 
#include<stdio.h>
void fun(int n)
{
static int i=1,j;
j=printf("%d\n",i); // when i=100 printf will return 4
// bcoz of 3 difits of 100 and 1 '\n' character
switch(j)
{
case 4:
exit(0);
default: i++;
fun(n) ;
}
}
int main()
{
int n;
n=100;
fun(n);
} 
0  Shubham Gupta 


Answer 
#include<stdio.h>
void fun(int n)
{
static int i=1,j;
printf("%d\n",i);
(100i)?(i++?fun(n):0):exit(0);
}
int main()
{
int n;
n=100;
fun(n);
} 
0  Shubham Gupta 


Answer 
#include<stdio.h>
#include<conio.h>
void main()
{
clrscr();
int i;
int j=100;
int c=0;
printf("1 to 100 then 99 to 1");
for(i=1;i<=100;i++;)
{ if (c==0)
{
printf("%d",i);
if(i==100)
{
c=1;
}
}
if(c==1)
{
j;
printf("%d",j);
if(j==0)
{
break;
}
}
} 
0  Ravi Sagar 


Answer 
#include<iostream.h>
using namespace std;
int i;
class A
{
public:
static void fun()
{
A a[100];
}
A(){cout<<++i<<"\t";}
~A(){cout<<i<<"\t";}
};
int main()
{
A::fun();
getchar();
return 0;
} 
0  Raveendra 


Answer 
int main()
{
int i=100;
start:
if(i==0)
{
printf("\t\t************************************************\n\n");
goto start1;
}
printf("%d\t",i);
i;
goto start;
start1:
if(i==101)
goto end;
printf("%d\t",i);
i++;
goto start1;
end:
printf("\n end of the program");
return 0;
} 
0  Jihad Mzahim 


Answer 
#include<stdio.h>
#include<conio.h>
int f(int);
void main()
{
static int n=0;
n++>99 ? 0 : f(n) ; //its value are not used.
}
int f(int n)
{
printf(" %d",n);
main();
printf(" %d",n); //]internally stack is ctr
return(1);
} /* run firstly,after press alt+F5. 
0  Ajeet Kumar 


Question 
is any negative marks for grp 1 preliminary (screening
test) exam 
Rank 
Answer Posted By 
Interview Question Submitted By :: Subbarao 
I also faced this Question!! 
© ALL Interview .com 
Answer 
No negtive marks at grp 1 prelimenary 
0  Rakesh Raju 


Answer 
No Negative marks for GroupI Exams 
0  Nav 


Question 
What the capacitor Current formula?, For 1 KVAr how amps
its required? for using the KVAr for boosting the PF Design
Calculation.( Eg: for 30 KVAr required how many KW?) 
Rank 
Answer Posted By 
Interview Question Submitted By :: Pasuvaraj 
I also faced this Question!! 
© ALL Interview .com 
Answer 
As per my knowledge,
On my site bellow capacitor bank I am using.
I have 350 Kvar capacitor bank in this bank 25 kvar
capacitors are placed.
Capacitor specification
Volt = 440
Kvar = 25
Three Phase
KVA
I = 
Volt *1.732
25000
I = 
440 *1.732
I = 32.80 Amps
Eg 30 Kvar
KVA
I = 
Volt *1.732
30000
I = 
440 *1.732
I = 39.36 Amps

1  Shri.. 


Answer 
You explained the answer in KVA? where do get the kva from
this variables, the formula for capacitor in KVAr, KVAr
into KW, KVA & Amps 
0  Pasuvaraj 


Answer 
For correcting PF KVAr is introduced, thus formula
pf=cos A is significant
there you should have a desired PF. If for example you need
a power factor of .90 to maintain for a 30kVAR the watts
that would come will be:
A=arccos .90
A= 25.84
WATTs= KVAR/tan 25.84
= 62500 watts approx.
remember that for PF correnction it is the KVAR that is in
need of computation and not the watts so the question would
rather be, how much capacitor kVAR you need to correct the
power factor. 
4  Arnie 


Answer 
VOLT = 400
KVAr = 30
PHASE = 3
I = KVAr

400 x 1.732
=43amps.
Kw = I x 0.624
= 26.8KW. 
3  Jose 


Answer 
The question requires more details.
First the "K" represents kilo or 1000.
The real power (kW) can be thought of as the xaxis and the
reactive power (kVar) from inductance or capacitance can be
thought of as the yaxis. The hypotenuse is the
Apparent power (KVA). The relationship of Real to apparent
power gives the Power Factor, where a power factor of 1.0
simply means that you only have real power, no reactive
power. The leading and lagging VARs from capacitance and
inductance, respectively can be added numerically since
they are on the same axis.
To ask, how muck kVars are required for a given kW doesn’t
make a lot of sense because you need to include the desired
power factor. 
0  Harry 


Answer 
Its 1.3A/KVAR 
0  Utkarsh 


Answer 
Kvar= 1.73*V*I*Sin$ ($ IS INSTESD OF PHASE ANGLE PHI)
so I= kVAR/1.73*V*SIN$
IN A PURELY CAPACITIVE CIRCUIT $ IS 90 DEGREE
SO TERM SIN 90 = 1
HENCE WE CAN CALCULATE CAPACITOR CURRENT BY kVAR/1.73*V 
0  Prakesh 


Answer 
Ic=IsinQ1I'sinQ2
where Q1 = phi1 and Q2 = phi
I is the curent, before correction and I' is the current,
after correction.
Ic is the subject of formula. 
0  Botsar Joseph Antony 


Answer 
** Capacitor Current formula is
I= kVAr/kV/1.732 ( for 3 ph capacitor )
**for 1 kVar capacitor... suppose voltage is 440 volts than,
I=1/0.440/1.732
I=1.31 Amps.
For all your information,generally 1 kVAr capacitor takes
0.5 watts...henceforth..
30 kvar capacitor required kw=30X0.5=15 watts and is 0.015kw
thanks!!!!!!! 
0  9561354591 


Answer 
normally Formula
Kvar= 1.732*V*I*Sin(pi)
If Pure Capacitor 90 Leads so The power factor is Unity(1)
Assume *V=415
*Sin(90)=1(But Reactive power is zero)
since I=Kvar/1.732*V*1 Eg. 1000/1.732*415*1=1.39A
other formula for Determine KW=KVAR/tan(pi)or KW=VIcos(PI)
Assume * cos(0.9)
since KW=KVAR/tan....Equ 1, take the cos invesr is equal to (0.9)=25.8419 ...Equ 2
KW=30KVAR/tan25.8419=61.94KW OR
they are more formulas
* KW=KVAR/tan(pi)
* Kw=KVA*cos(pi)
* Kw=SQroot(KVAZ^2(KVAr)^2 
0  Venkatesh O 


Answer 
dear,sir
my answer is 1 kvar = 1.3122 will be
my 2nd answer is 30 kvar= 44.5 kw will be and the mantioned
by powr factor like this,current cos(f1)and (requred cos(f2)
if my answer is correct then i shall be obligged to you 
0  Mohammad Rafique 


Answer 
Q = VIsin(fi)
capacitor current = I = Q/Vsin(fi)
For , 230 v and power factor angle 90 ,then
I = 1/230*sin 90 = 4.32 amp.
If power factor angle is 36.89 (power factor 0.8)
,then
P/Q = kw/KVAR = VIcos(fi)/VIsin(fi)
P/Q = cos(fi)/sin(fi) = Tan(fi)
P = Q tan(fi)
P = 30 tan(36.89) = 30 * 0.75 = 22.5 Kw 
0  Sagar 


Answer 
Kvar: 1.732* v*i
1kvar=1000var
I=1000/1.732*415 for three phas
I=1.392amps 
0  Srinu 


Question 
What is the full form of ESIC ?whatproportion of
PF,ESIC,EDLi,TDS,BONUS,GRATUITY etc are been decucted from
salary? 
Rank 
Answer Posted By 
Interview Question Submitted By :: Priya 
I also faced this Question!! 
© ALL Interview .com 
Answer 
The abbreviation ESIC stands for "Employee's State Insurance
Scheme".
check this link for more
information:http://esic.nic.in/citizen_charter.htm
The deduction in salary against various heads are as given
below:
PF: 12% of Basic+DA (Employee Share)
12% of Basic+DA (Employer Share)
ESIC : 1.75% of Gross Salary (Employee Share)
4.75% of Gross Salary (Employer Share)
EDLI : 0.5% 
5  Naresh 


Answer 
The abbreviation ESIC stands for "Employee's State Insurance
Scheme".
check this link for more
information:http://esic.nic.in/citizen_charter.htm
The deduction in salary against various heads are as given
below:
PF: 12% of Basic+DA (Employee Share)
12% of Basic+DA (Employer Share)
ESIC : 1.75% of Gross Salary (Employee Share)
4.75% of Gross Salary (Employer Share)
EDLI : 0.5% 
0  Aniket 


Answer 
The abbreviation ESIC stands for "Employee's State Insurance
Scheme".
check this link for more
information:http://esic.nic.in/citizen_charter.htm
The deduction in salary against various heads are as given
below:
PF: 12% of Basic+DA (Employee Share)
12% of Basic+DA (Employer Share)
ESIC : 1.75% of Gross Salary (Employee Share)
4.75% of Gross Salary (Employer Share)
EDLI : 0.5% 
0  Aravindan S 


Answer 
The abbreviation ESIC stands for "Employee's State Insurance
Scheme".
check this link for more
information:http://esic.nic.in/citizen_charter.htm
The deduction in salary against various heads are as given
below:
PF: 12% of Basic+DA (Employee Share)
12% of Basic+DA (Employer Share)
ESIC : 1.75% of Gross Salary (Employee Share)
4.75% of Gross Salary (Employer Share)
EDLI : 0.05% 
0  Aravindan S 


Answer 
What are the Rules For ESIC Dedudtion and PF Deductions? 
3  Sunil Kasana 


Answer 
E.s.i.c 
0  Dipika 


Answer 
full form of ESIC is Employee State Insurance Corporation.
percentage of conatribution is as below:
(a) PF  12% of Basic +DA+VDA from employee and 13.61% from
employer i.e. 8.88% in a/c No 10, 3.67% in a/c No 1, 1.1%
in a/c No 2, .5% in a/c No 21 and 0.01% in a/c No 22
(b) 1.75% of Gross salary from employer and 4.75% from
employees.
(c) EDLI  0.5% as deducted with EPF as a/c No 21
deducation.
(d) Minimum 8.33% or Maximum 20%
(e)Gratuity is applicabale after 5 year service and
calculate the same as per formula,
Gratuity  Present salary(Basic +DA+VDA)*15*No of year
served/26 
0  Ankit 


Answer 
The full form of ESIC is EMPLOYEES’ STATE INSURANCE SCHEME
OF INDIA.
ESIC : 1.75% of Gross Salary (Employee Share)
4.75% of Gross Salary (Employer Share) .
PF: 12% of Basic+DA (Employee Share)
12% of Basic+DA (Employer Share).
EDLI  0.5% as deducted with EPF as a/c No 21
deducation.
(e)Gratuity is applicabale after 5 year service and
calculate the same as per formula,
Gratuity  Present salary(Basic +DA+VDA)*15*No of year
served/26.
TDS means Tax dedcuted at sourece,
Total income less deduction U/s 16 and Deduction u/s 80c,
cc and 80D equal taxable income 
0  Shoaib Khan 


Answer 
this post was real good help.. thanks 
0  Tejaswita 


Answer 
i don't no what is the full form of esic? plz kindly tell
me what is esic. 
0  Sunil Kumar Sahoo 


Answer 
ESIC(EMPLOYEES’ STATE INSURANCE SCHEME OF INDIA)
TYPE CONTRIBUTION SHARE
PF 12% OF BASIC +DA Employee
PF 12% OF BASIC +DA Employer
8.33% or max. 541 for pension fund
EDLI 0.5% Basic +DA or max Rs. 32.50 Employer
"ESIC(EMPLOYEES’ STATE INSURANCE SCHEME OF INDIA
" 1.75% OF WAGES Employee
ESIC 4.75% of wages Employee
Administration charges
PF 1.1% Basic + DA Employer
EDLI 0.01% of basic + DA or max Rs. 0.65 Employer
eTDS form 24Q filling dates
Quarter 1 JUNE 15Jul
Quarter 2 SEP 15Oct
Quarter 3 DEC 15Jan
Quarter 4 MAECH 15May
Important dates
21 st Payment of ESIC
25 th PF Form 12A
12th may ESIC Form 5
11th nov ESIC Form 5
25th july MLWF for JUNE
25th jan MLWF for Dec.
Section Transaction TDS rate in (%)
193 Interest on Debentures & Securities 10
194 Deemed Dividend 10
194 A Other Interest 10
194 B Lottery > Rs. 5000 30
194BB Win from Horse Race>2500 30
194C Contract of Transport if PAN Provided 0
Contract to Individual/HUF 1
Contract to Others 2
194 D Insurance Commission>5000 10
194EE Withdrawl from NSS>2500 20
194F Repurchase of units MF/UTI 20
194G Commission on sale of lottries>1000 10
194H Commission/Brokerage>2500 10
194I Rent>120000 p.a on Plant & Machinery 2
Rent on Land,Building etc. 10
194J Professional Fees>20000 10
194LA Compensation on Compulsory Acquisition of immovable
property >Rs.1,00,000 during the financial year 10
Surcharge 0
Cess 0
Income tax slabs 20112012 for General,Women,Senior
citizen,very senior citizen tax payers
Income tax slab (in Rs.) Tax Income tax
slab (in Rs.) Tax Income tax slab (in Rs.)
Tax Income tax slab (in Rs.) Tax
0 to 1,80,000 No tax 0 to 1,90,000 No tax
0 to 2,50,000 No tax 0 to 5,00,000 0%
1,80,001 to 5,00,000 10% 1,90,001 to 5,00,000
10% 2,50,001 to 5,00,000 10%
5,00,001 to 8,00,000 20%
5,00,001 to 8,00,000 20% 5,00,001 to 8,00,000
20% 5,00,001 to 8,00,000 20%
Above 8,00,000 30
Above 8,00,000 30% Above 8,00,000 30%
Above 8,00,000 30%
1. It depends upon the percentage on which your company
wants to give bonus to its employees. Minimum bonus is
8.33% of basic salary earned during the accounting year and
Maximum is 20% under the payment of Bonus Act,1965.
Any employee working in an organisation for more than equal
to 5 yrs is eligible for gratuity which is paid only on
retirement or separation by means of resignation or
termination, paid with his full n final account. it is
calculated as (Basic)/26*15* no . of completed yrs of
service , ie the employee is paid for 15days extra for
every completed yr . if the part duration is more than 6
months it is taken as one full yr and if it is less thenit
is treated null 
0  Manoj Modi 


Answer 
ull form of ESIC is Employee State Insurance Corporation.
percentage of conatribution is as below:
(a) PF  12% of Basic +DA+VDA from employee and 13.61% from
employer i.e. 8.88% in a/c No 10, 3.67% in a/c No 1, 1.1%
in a/c No 2, .5% in a/c No 21 and 0.01% in a/c No 22
(b) 1.75% of Gross salary from employer and 4.75% from
employees.
(c) EDLI  0.5% as deducted with EPF as a/c No 21
deducation.
(d) Minimum 8.33% or Maximum 20%
(e)Gratuity is applicabale after 5 year service and
calculate the same as per formula,
Gratuity  Present salary(Basic +DA+VDA)*15*No of year
served/26 
0  Usha Sharma 


Answer 
employees state insurence scheme. 
0  Devanagouda 


Question 
when will be the indian bank clerical results will be
announced 
Rank 
Answer Posted By 
Interview Question Submitted By :: Karthi 
I also faced this Question!! 
© ALL Interview .com 
Answer 
dono pa... i'm also waiting for dat... if anyone comes to
know abt it, plzzzzzzzzzzzzzz inform 
3  Senthil 


Answer 
if u inform i will know. 
0  Naveen Kumar 


Answer 
may be august 2009,it will be announced,why because exam
was conducted on jun2009,so there is 2months process. 
0  Bobbili Suresh 


Answer 
evn i don know.... will inform wen i com to know the results 
5  Jay 


Answer 
there s 11000 clerical vacancy in SBI. refer SBI official
site n apply... all the best friends 
0  Naga 


Answer 
SBI has anounced 900 clerical vacancies for chennai circle
(Tamil Nadu) itself. Good opportunity to become a SBI
staff. all the best 
0  Kumaran 


Answer 
YES 
0  Shekar Reddy 


Answer 
But SBI has called for a marketing job yaar.. 
0  Shruti 


Answer 
it will be declared in the last week of aug or may be in september....because sarkari kaam is little bit lazy... 
0  Mandeep 


Answer 
hai friends,
this is aruna. i wrote the indian bank clerical cadre
exam. pls inform me too when the result has come. 
0  Aruna Sathyanarayanan 


Answer 
i think it will be declared in the next month
12th sep... 
0  Balu 


Answer 
i think in ist week of sep.....dat is sure 
0  Ritu 


Answer 
ya i too waiting for result.it will be in august or
september i think so pls inform me too.......friends 
0  Parva 


Answer 
thats what all the administration of indian bank are getting
head aches to corrected that papers so its too late.i think
they will announce on aug 30 
0  G.phani Kumar 


Answer 
hi.. im new 2 dis forum... so far i wrote canara bank ,
corporation bank , central and indian bank... both n canara
and corporation i got cal for interview, but finally i cud
not make it yaar... it reduces my confidenca level.. it
bothers me a lot.. wats tat tey expec n interview.. 
0  Lalitha 


Answer 
The results will be nnnonced at the end of september 
5  Nandhini 


Answer 
hi nandhini,
how do u know that the results will be announced by september 
0  Jayashree 


Answer 
I called today(5909) the head office and they replied that
they are going to release the results on 10th september.so
be ready. don't loose ur confidential level. best of luck. 
0  Veera 


Answer 
ha veera,
thank u so much 
0  Jayashree 


Answer 
thanku for the intimation of date u r very helpful 
0  Swathi 


Answer 
i also think dat results will b announced by end of september 
0  Sonakshi 


Answer 
thanks for the information veera 
0  Kanchana 


Answer 
it will be announed by august 
0  Navith Ahamed.a 


Answer 
hi, pls inform me when is tentative date of indian bank
result 
0  Bhuvana 


Answer 
when will be announce indian bank clerical results please
reply. 
0  Rajendran.g 


Answer 
results have been announced
pls check indian bank website 
0  Giridhar 


Answer 
this is too bad that we had written exams on july 2009 yet
the bank has not yet produced the result..then why they
conducted examination 
0  Saranya 


Answer 
on september 10 
0  Bhawna Manik 


Answer 
it will be in 1st weak in oct, it sure 
0  Sushil 


Answer 
i am also wrote the same exam.Every bank took atleast three
months to declare the result.so till date, only two months
are gone.so wait for one more month friends.Definitely you
will get an opportunity.All the best my friends.
Yours,
Arun,madurai.
9245328227 
0  Arunkumar 


Question 
how much memory is required to install windows vista 
Rank 
Answer Posted By 
Interview Question Submitted By :: Guest 
I also faced this Question!! 
© ALL Interview .com 
Answer 
512 MB of Random Access Memory. 
0  M.sairam 


Answer 
1 gb required for getting good speed 
0  Ashish 


Answer 
the memory space required for installation is Appoximately
of 2.0 gb of HDD space. 
0  Srinivasa Aro 


Answer 
512 MB RAM 
0  Sairam Maddipati 




Back to Questions Page 